Technical Articles

  • Next-Generation Endoscopic Surgical Stapler Prototyping

    Learn more
  • Developing a Period-Based Air-Fuel Ratio Controller

    Learn more
  • Simulating Cardiovascular Conditions

    Learn more

Filter all Articles


Article Published
A rapid prototyping workflow based on Model-Based Design enables Ethicon Endo-Surgery engineers to implement and test new design refinements in minutes and reduce overall development time by months.
Jan 2015
Article describes method for controlling AFR that combines low cost of conventional switching oxygen sensor and streamlined catalyst conversion efficiency calibration made possible by direct adjustment of exhaust AFR amplitude, frequency, and bias.
Sep 2014
Engineers use MATLAB and Simulink to analyze image and signal data, design controls and signal processing algorithms, implement their designs in software after thorough verification and validation, and generate reports for standards compliance.
Aug 2014
A fully automated MCL modeled in Simulink and Simscape enables researchers to accurately simulate cardiac conditions and dynamics to evaluate the performance of cardiac assist devices.
Nov 2013
Using industry-standard tools such as MATLAB and Simulink, and low-cost hardware such as Arduino, Beagleboard, LEGO MINDSTORMS, and Raspberry Pi, students tackle real engineering problems and acquire the skills they will need for careers in industry.
Oct 2013
Engineers and scientists connect MATLAB and Simulink to FPGAs, microprocessors, cameras, instruments, and other hardware to design, test, and verify systems that combine hardware and software components.
Oct 2013
Rapid prototyping and automatic VHDL code generation enable BBN engineers to develop, implement, and improve data-encryption schemes much faster than would be possible with traditional methods.
Sep 2013
This article describes a workflow for creating a permanent magnet synchronous machine (PMSM) plant model using MATLAB® and Simulink® and commonly available lab equipment.
Sep 2013
With a custom rapid control prototyping platform and Model-Based Design, Hella engineers produce a real-time prototype incorporating 80% of the final product’s functionality in a few months.
Mar 2013
Using Simulink models and physical structures, Lehigh University researchers test reactions to seismic activity in ships’ hulls, bridge decks, shear walls, and four-story buildings.
Dec 2012
Simulations in MATLAB and Simulink enable Johnson Matthey engineers to understand the complex interactions taking place within a catalyst, see which parameters most affect the output, and make design trade-offs based on the results.
Nov 2012
From simulation and early verification to real-time testing, Model-Based Design results in shorter, less costly design cycles and helps designers create more robust, higher-performing control systems for motor control applications.
Oct 2012
Third-party solutions enhance Model-Based Design for system engineering and embedded-system development in renewable energy applications.
Oct 2012
Overview of resources for project-based learning, including books, a webinar, and Simulink support for interfacing with low-cost hardware.
Oct 2012
A challenging controls project gives many students the skills of seasoned engineers well before they graduate.
Feb 2012
This paper provides an introduction to Model-Based Design and on-target rapid prototyping (OTRO), as well as a step-by-step approach for getting started with OTRP.
Dec 2011
Amimon's Wireless Home Digital Interface technology enables 1080p frames to be sent 60 times per second through walls to a device 100 feet away.
Oct 2011
Use simulation to design and verify complex control strategies in a model—then reuse the model to automatically generate IEC 61131 structured text to program the PLC for deployment.
Oct 2011
Balance speed and accuracy by using Simscape to configure your model for real- time simulation.
Oct 2011
Using an adaptive median filter as an example, this article shows how to make a MATLAB algorithm suitable for hardware implementation.
Mar 2011
This article demonstrates how to ease the calculation and use of gradients using Symbolic Math Toolbox™.
Mar 2010
Johns Hopkins University Applied Physics Laboratory is leading a worldwide team whose mission is to develop a prosthetic that enables the wearer to move with the speed, dexterity, and force of a real arm and perceive pressure, force, & temperature.
Nov 2009
Model-Based Design enabled IAV to reduce their mass-production ECU development process from three years to just 18 months.
Nov 2009
Designing audio codec filter in MATLAB and using Filter Design HDL Coder to generate synthesizable RTL code lets Mediatek rapidly evaluate filter architectures, optimize for silicon area & reduce the RTL code development cycle to less than 2 weeks.
Nov 2009
Using a do-while loop as an example, this article demonstrates how modeling design patterns can be used to generate efficient C code from algorithm models.
Sep 2009
Using a thermal model of a house as an example, this article describes a methodology for communicating with other devices via TCP/IP using inexpensive external hardware. The real-time system used is xPC Target.
Jul 2008
Case Western Reserve University researchers developed a programmable device that sends electrical signals to an implant that activates paralyzed limbs and muscles.
Feb 2008
This paper shows how a vehicle’s geometry can be optimized, control coefficients calculated, open-loop plant model created, flight controller designed, and closed-loop simulation run, to confirm that system-level requirements are satisfied.
Nov 2007

Receive the latest MATLAB and Simulink technical articles.

Related Resources

Latest Blogs