Main Content

Unit Delay Enabled Resettable External IC (Obsolete)

Delay signal one sample period, if external enable signal is on, with external Boolean reset and initial condition

Compatibility

Note

The Unit Delay Enabled Resettable External IC block is not recommended. This block was removed from the Discrete library in R2016b. In new models, use the Delay block (with parameters set appropriately). Existing models that contain the Unit Delay Enabled Resettable External IC block continue to work for backward compatibility.

  • Unit Delay Enabled Resettable External IC (Obsolete) block

Library

Additional Math & Discrete / Additional Discrete (until R2016b)

Description

The Unit Delay Enabled Resettable External IC block combines the features of the Unit Delay Enabled (Obsolete), Unit Delay External IC (Obsolete), and Unit Delay Resettable (Obsolete) blocks.

The block can reset its state based on an external reset signal R. When the enable signal E is on and the reset signal R is false, the block outputs the input signal delayed by one sample period.

When the enable signal E is on and the reset signal R is true, the block resets the current state and its output to the Initial condition.

When the enable signal is off, the block is disabled, and the state and output do not change except for resets. The enable signal is on when E is not 0, and off when E is 0.

You specify the time between samples with the Sample time parameter. A setting of -1 means that the block inherits the Sample time.

Data Type Support

The Unit Delay Enabled Resettable External IC block accepts signals of the following data types:

  • Floating point

  • Built-in integer

  • Fixed point

  • Boolean

The data types of the inputs u and IC must be the same. The output has the same data type as u and IC.

For more information, see Data Types Supported by Simulink in the Simulink® documentation.

Parameters

Sample time

Specify the time interval between samples. To inherit the sample time, set this parameter to -1. See Specify Sample Time in the online documentation for more information.

Characteristics

Data Types

Double | Single | Boolean | Base Integer | Fixed-Point

Sample Time

Specified in the Sample time parameter

Direct Feedthrough

No, of the input port

No, of the enable port

Yes, of the enable port

Yes, of the external IC port

Multidimensional Signals

No

Variable-Size Signals

No

Zero-Crossing Detection

No

Code Generation

Yes

Version History

Introduced before R2006a