Indexing into a matrix is a means of selecting a subset of elements from the matrix. MATLAB® has several indexing styles that are not only powerful and flexible, but also readable and expressive. Indexing is a key to the effectiveness of MATLAB at capturing matrix-oriented ideas in understandable computer programs.
Indexing is also closely related to another term MATLAB users often hear: vectorization. Vectorization means using MATLAB language constructs to eliminate program loops, usually resulting in programs that run faster and are more readable. Of the many possible vectorization techniques, many rely on MATLAB indexing methods, five of which are described in this article.
Let's start with the simple case of a vector and a single subscript. The vector is:
v = [16 5 9 4 2 11 7 14];
The subscript can be a single value:
v(3) % Extract the third element ans = 9
Or the subscript can itself be another vector:
v([1 5 6]) % Extract the first, fifth, and sixth elements ans = 16 2 11
The colon notation in MATLAB provides an easy way to extract a range of elements from v:
v(3:7) % Extract the third through the seventh elements ans = 9 4 2 11 7
Swap the two halves of v to make a new vector:
v2 = v([5:8 1:4]) % Extract and swap the halves of v v2 = 2 11 7 14 16 5 9 4
end operator is an easy shorthand way to refer to the last element of v:
v(end) % Extract the last element ans = 14
end operator can be used in a range:
v(5:end) % Extract the fifth through the last elements ans = 2 11 7 14
You can even do arithmetic using
v(2:end-1) % Extract the second through the next-to-last elements ans = 5 9 4 2 11 7
Combine the colon operator and
end to achieve a variety of effects, such as extracting every k-th element or flipping the entire vector:
v(1:2:end) % Extract all the odd elements ans = 16 9 2 7 v(end:-1:1) % Reverse the order of elements ans = 14 7 11 2 4 9 5 16
By using an indexing expression on the left side of the equal sign, you can replace certain elements of the vector:
v([2 3 4]) = [10 15 20] % Replace some elements of v v = 16 10 15 20 2 11 7 14
Usually the number of elements on the right must be the same as the number of elements referred to by the indexing expression on the left. You can always, however, use a scalar on the right side:
v([2 3]) = 30 % Replace second and third elements by 30 v = 16 30 30 20 2 11 7 14
This form of indexed assignment is called scalar expansion.
Indexing Matrices with Two Subscripts
Now consider indexing into a matrix. We'll use a magic square for our experiments:
A = magic(4) A = 16 2 3 13 5 11 10 8 9 7 6 12 4 14 15 1
Most often, indexing in matrices is done using two subscripts—one for the rows and one for the columns. The simplest form just picks out a single element:
A(2,4) % Extract the element in row 2, column 4 ans = 8
More generally, one or both of the row and column subscripts can be vectors:
A(2:4,1:2) ans = 5 11 9 7 4 14
: in a subscript position is shorthand notation for
1:end and is often used to select entire rows or columns:
A(3,:) % Extract third row ans = 9 7 6 12 A(:,end) % Extract last column ans = 13 8 12 1
There is often confusion over how to select scattered elements from a matrix. For example, suppose you want to extract the (2,1), (3,2), and (4,4) elements from A. The expression
A([2 3 4], [1 2 4]) won't do what you want. This diagram illustrates how two-subscript indexing works:
Extracting scattered elements from a matrix requires a different style of indexing, and that brings us to our next topic.
What does this expression
When you index into the matrix A using only one subscript, MATLAB treats A as if its elements were strung out in a long column vector, by going down the columns consecutively, as in:
16 5 9 ... 8 12 1
The expression A(14) simply extracts the 14th element of the implicit column vector. Indexing into a matrix with a single subscript in this way is often called linear indexing.
Here are the elements of the matrix A along with their linear indices:
The linear index of each element is shown in the upper left.
From the diagram you can see that
A(14) is the same as
The single subscript can be a vector containing more than one linear index, as in:
A([6 12 15]) ans = 11 15 12
Consider again the problem of extracting just the (2,1), (3,2), and (4,4) elements of A. You can use linear indexing to extract those elements:
A([2 7 16]) ans = 5 7 1
That's easy to see for this example, but how do you compute linear indices in general? MATLAB provides a function called
sub2ind that converts from row and column subscripts to linear indices. You can use it to extract the desired elements this way:
idx = sub2ind(size(A), [2 3 4], [1 2 4]) ans = 2 7 16 A(idx) ans = 5 7 1
Advanced Examples Using Linear Indexing
Example 1: Shifting the Rows of a Matrix
A MATLAB user recently posed this question in the
comp.soft-sys.matlab newsgroup: If I want to shift the rows of an m-by-n matrix
k places, I use
A(:,[n-k+1:n 1:n-k]). But what if
k is a function of the row number? That is, what if
k is a vector of length
m? Is there a quick and easy way to do this?
Regular newsgroup contributor Peter Acklam posted this solution that uses
sub2ind and linear indexing:
% index vectors for rows and columns p = 1:m; q = 1:n; % index matrices for rows and columns [P, Q] = ndgrid(p, q); % create a matrix with the shift values K = repmat(k(:), [1 n]); % update the matrix with the column indexes Q = 1 + mod(Q+K, n); % create matrix of linear indexes ind = sub2ind([m n], P, Q); % finally, create the output matrix B = A(ind);
Example 2: Setting Some Matrix Elements to Zero
Another MATLAB user posted this question: I want to get the maximum of each row, which isn't really a problem, but afterwards I want to set all the other elements to zero. For example, this matrix:
1 2 3 4 5 5 6 5 7 9 8 3
0 0 0 4 0 0 6 0 0 9 0 0
Another regular newsgroup contributor, Brett Shoelson, provided this compact solution.
[Y,I] = max(A, , 2); B = zeros(size(A)); B(sub2ind(size(A), 1:length(I), I')) = Y;
Another indexing variation, logical indexing, has proven to be both useful and expressive. In logical indexing, you use a single, logical array for the matrix subscript. MATLAB extracts the matrix elements corresponding to the nonzero values of the logical array. The output is always in the form of a column vector. For example,
A(A > 12) extracts all the elements of
A that are greater than 12.
A(A > 12) ans = 16 14 15 13
Many MATLAB functions that start with
is return logical arrays and are very useful for logical indexing. For example, you could replace all the
NaN elements in an array with another value by using a combination of
isnan, logical indexing, and scalar expansion. To replace all
NaN elements of the matrix
B with zero, use
B(isnan(B)) = 0
Or you could replace all the spaces in a string matrix
str with underscores.
str(isspace(str)) = '_'
Logical indexing is closely related to the
find function. The expression
A(A > 5) is equivalent to
A(find(A > 5)). Which form you use is mostly a matter of style and your sense of the readability of your code, but it also depends on whether or not you need the actual index values for something else in the computation. For example, suppose you want to temporarily replace
NaN values with zeros, perform some computation, and then put the
NaN values back in their original locations. In this example, the computation is two-dimensional filtering using
filter2. You do it like this:
nan_locations = find(isnan(A)); A(nan_locations) = 0; A = filter2(ones(3,3), A); A(nan_locations) = NaN;
We hope that the MATLAB indexing variants illustrated in this article give you a feel for ways you can express algorithms compactly and efficiently. Including these techniques and related functions in your MATLAB programming repertoire expands your ability to create masterful, readable, and vectorized code.