Measuring Signal Similarities
Measure signal similarities. It will help you answer questions such as: How do I compare signals with different lengths or different sampling rates? How do I find if there is a signal or just noise in a measurement? Are two signals related? How to measure a delay between two signals (and how do I align them)? How do I compare the frequency content of two signals?
Introduction to MIMO Systems
Multiple-Input-Multiple-Output (MIMO) systems, which use multiple antennas at the transmitter and receiver ends of a wireless communication system. MIMO systems are increasingly being adopted in communication systems for the potential gains in capacity they realize when using multiple antennas. Multiple antennas use the spatial dimension in
Dynamic Matrix Control Tutorial
Dynamic Matrix Control (DMC) was the first Model Predictive Control (MPC) algorithm introduced in early 1980s. Nowadays, DMC is available in almost all commercial industrial distributed
Fit Exponential Models Using the fit Function
Fit an exponential model to data using the fit function.
Removing High-Frequency Noise from an ECG Signal
This examples shows you how to filter an ECG signal that has high-freqquency noise, and remove the noise by low-pass filtering.
Investigation of the friction velocity
The friction velocity retrieved with the double and triple rotation as well as the planar fit algorithm is compared to the target one.
Example Planar Fit (PF)
The algorithm proposed by Wilczak et al.  is used to correct the tilt angles of one anemometer.
Example double rotation
The double rotation algorithm is used to correct the tilt angle of one anemometer
Example triple rotation
The triple rotation algorithm is used to correct the tilt angle of one anemometer
Simulation of a Bouncing Ball
Use two different approaches to modeling a bouncing ball using Simulink®.
Modeling an Automatic Transmission Controller
Model an automotive drivetrain with Simulink®. Stateflow® enhances the Simulink model with its representation of the transmission control logic. Simulink provides a powerful
Modeling a Fault-Tolerant Fuel Control System
Combine Stateflow® with Simulink® to efficiently model hybrid systems. This type of modeling is particularly useful for systems that have numerous possible operational modes based on
Anti-Windup Control Using a PID Controller
Use anti-windup schemes to prevent integration wind-up in PID controllers when the actuators are saturated. We use the PID Controller block in Simulink® which features two built-in
Designing a High Angle of Attack Pitch Mode Control
Use the Control System Toolbox™ and Simulink® Control Design™ to interact with Simulink to design a digital pitch control for the aircraft. In this example, we will design the controller to