Measuring Signal Similarities
Measure signal similarities. It will help you answer questions such as: How do I compare signals with different lengths or different sampling rates? How do I find if there is a signal or just noise in a measurement? Are two signals related? How to measure a delay between two signals (and how do I align them)? How do I compare the frequency content of two signals?
Perform basic peak analysis. It will help you answer questions such as: How do I find peaks in my signal? How do I measure distance between peaks? How do I measure the amplitude of peaks of a signal which is affected by a trend? How do I find peaks in a noisy signal? How do I find local minima?
CoMP Dynamic Point Selection with Multiple CSI Processes
How multiple Channel State Information (CSI) processes provide the network with feedback for Coordinated Multipoint (CoMP) operation. In this example User Equipment (UE) data is
Removing High-Frequency Noise from an ECG Signal
Lowpass filter an ECG signal that contains high frequency noise.
Scatter Plot and Eye Diagram with MATLAB Functions
Visualize signal behavior through the use of eye diagrams and scatter plots. The example uses a QPSK signal which is passed through a square-root raised cosine (RRC) filter.
Fit Exponential Models Using the fit Function
Fit an exponential model to data using the fit function.
Wind Farm (IG)
Phasor simulation of a 9-MW wind farm using Induction Generators (IG) driven by variable-pitch wind turbines.
According to LEAN thinking, a company's level of waste tells a lot about its effectiveness, its internal organization, and its strategic planning. Mantain high quality standards and low
What do you know about Electrical Stimuation?
Authors : Andrea Gargano, Paolo Seghetti, Niccolò Biasi
2-D and 3-D Plots
To create two-dimensional line plots, use the plot function. For example, plot the value of the sine function from 0 to 2\pi :
Approximating Nonlinear Relationships: Type S Thermocouple
Approximate nonlinear relationships of a type S thermocouple.
Simulation of a Bouncing Ball
Use two different approaches to modeling a bouncing ball using Simulink®.
Anti-Windup Control Using a PID Controller
Use anti-windup schemes to prevent integration wind-up in PID controllers when the actuators are saturated. We use the PID Controller block in Simulink® which features two built-in
Designing a Guidance System in MATLAB and Simulink
Use the model of the missile airframe presented in a number of published papers (References ,  and ) on the use of advanced control methods applied to missile autopilot design. The