MATLAB Examples

# Computing a fractal dimension with Matlab: 1D, 2D and 3D Box-counting

F. Moisy, 9 july 2008. University Paris Sud.

## Contents

A set (e.g. an image) is called "fractal" if it displays self-similarity: it can be split into parts, each of which is (at least approximately) a reduced-size copy of the whole.

A possible characterisation of a fractal set is provided by the "box-counting" method: The number N of boxes of size R needed to cover a fractal set follows a power-law, N = N0 * R^(-DF), with DF<=D (D is the dimension of the space, usually D=1, 2, 3).

DF is known as the Minkowski-Bouligand dimension, or Kolmogorov capacity, or Kolmogorov dimension, or simply box-counting dimension.

## About the 'boxcount' package for Matlab

The following examples illustrate how to use the Matlab package 'boxcount' to compute the fractal dimension of 1D, 2D or 3D sets, using the 'box-counting' method.

The directory contains the main function 'boxcount', three sample images, and an additional function 'randcantor' to generate 1D, 2D and 3D generalized random Cantor sets.

Type 'help boxcount' or 'help randcantor' for more details.

## Box-counting of a 2D image

Let's start with the image 'dla.gif', a 800x800 logical array (i.e., it contains only 0 and 1). It originates from a numerical simulation of a "Diffusion Limited Aggregation" process, in which particles move randomly until they hit a central seed. (see P. Bourke, http://local.wasp.uwa.edu.au/~pbourke/fractals/dla/ )

```c = imread('dla.gif'); imagesc(~c) colormap gray axis square ```

Calling boxcount without output arguments simply displays N (the number of boxes needed to cover the set) as a function of R (the size of the boxes). If the set is a fractal, then a power-law N = N0 * R^(-DF) should appear, with DF the fractal dimension (Kolmogorov capacity).

```boxcount(c) ```

The result of the box count can be obtained using:

```[n, r] = boxcount(c) loglog(r, n,'bo-', r, (r/r(end)).^(-2), 'r--') xlabel('r') ylabel('n(r)') legend('actual box-count','space-filling box-count'); ```
```n = Columns 1 through 3 44000 27466 11786 Columns 4 through 6 4265 1386 421 Columns 7 through 9 121 37 12 Columns 10 through 11 4 1 r = Columns 1 through 3 1 2 4 Columns 4 through 6 8 16 32 Columns 7 through 9 64 128 256 Columns 10 through 11 512 1024 ```

The red dotted line shows the scaling N® = R^-2 for comparision, expected for a space-filling 2D image. The discrepancy between the two curves indicates a possible fractal behaviour.

## Local scaling exponent

If the set has some fractal properties over a limited range of box size R, this may be appreciated by plotting the local exponent, D = - d ln N / ln R. For this, use the option 'slope':

```boxcount(c, 'slope') ```

Strictly speaking, the local exponent is not constant, but lies in the range [1.6 1.8].

Let's try now with another image, the so-called Apollonian gasket (Wikipedia, http://en.wikipedia.org/wiki/Image:Apollonian_gasket.gif ). The background level is 198 for this image, so this value is used to binarize the image:

```c = imread('Apollonian_gasket.gif'); c = (c<198); imagesc(~c) colormap gray axis square figure boxcount(c) figure boxcount(c,'slope') ```

The local slope shows that the image is indeed approximately fractal, with a fractal dimension DF = 1.4 +/- 0.1 for scales R < 100.

## Box-counting of a natural image.

Consider now this RGB (2272x1704) picture of a tree (J.A. Adam, http://epod.usra.edu/archive/images/fractal_tree.jpg ):

```c = imread('fractal_tree.jpg'); image(c) axis image ```

Let's extract a rectangle in the blue (3rd) plane, and binarize the image for levels < 80 (white pixels are logical 'true'):

```i = c(1:1200, 120:2150, 3); bi = (i<80); imagesc(bi) colormap gray axis image ```
```[n,r] = boxcount(bi,'slope'); ```

The boxcount shows that the local exponent is approximately constant for less than one decade, in the range 8 < R < 128 (the 'exact' value of Df depends on the threshold, 80 gray levels here):

```df = -diff(log(n))./diff(log(r)); disp(['Fractal dimension, Df = ' num2str(mean(df(4:8))) ' +/- ' num2str(std(df(4:8)))]); ```
```Fractal dimension, Df = 1.801 +/- 0.06394 ```

## Generalized random Cantor sets

Fractal sets may be obtained from an IFS (iterated function system). For example, the function 'randcantor' provided with the package generates a 1D, 2D or 3D generalized random Cantor set. This set is obtained by iteratively dividing an initial set filled with 1 into 2^D subsets, and setting each subset to 0 with probability P. The result is a fractal set (or "fractal dust") of dimension DF = D + log(P)/log(2) < D.

The following example generates a 2048x2048 image with probability P=0.8, i.e. fractal dimension DF = 1.678.

```c = randcantor(0.8, 2048, 2); imagesc(~c) colormap gray axis image ```

Let's see its box-count and local exponent

```boxcount(c) figure boxcount(c, 'slope') ```

For such set generated by an iterated scheme, the local slope shows as expected a well defined plateau, around DF = 1.7.

## 1D random Cantor set

1D random Cantor sets may also be generated. Here, a 2^18 = 262144 long set with P = 0.9 and expected fractal dimension DF = 1 + log(P)/log(2) = 0.848:

```tic c = randcantor(0.9, 2^18, 1, 'show'); figure boxcount(c, 'slope'); toc ```
```Elapsed time is 1.153065 seconds. ```

## 3D random Cantor set

Now a 3D random Cantor set of size (2^7)^3 = 128^3 with P = 0.7 and expected fractal dimension DF = 3 + log(P)/log(2) = 2.485. Note that 3D sets cannot be displayed using randcantor.

```tic c = randcantor(0.7, 2^7, 3); toc tic boxcount(c, 'slope'); toc ```
```Elapsed time is 11.094641 seconds. Elapsed time is 0.137298 seconds. ```

## More?

```help boxcount.m ```
``` BOXCOUNT Box-Counting of a D-dimensional array (with D=1,2,3). [N, R] = BOXCOUNT(C), where C is a D-dimensional array (with D=1,2,3), counts the number N of D-dimensional boxes of size R needed to cover the nonzero elements of C. The box sizes are powers of two, i.e., R = 1, 2, 4 ... 2^P, where P is the smallest integer such that MAX(SIZE(C)) <= 2^P. If the sizes of C over each dimension are smaller than 2^P, C is padded with zeros to size 2^P over each dimension (e.g., a 320-by-200 image is padded to 512-by-512). The output vectors N and R are of size P+1. For a RGB color image (m-by-n-by-3 array), a summation over the 3 RGB planes is done first. The Box-counting method is useful to determine fractal properties of a 1D segment, a 2D image or a 3D array. If C is a fractal set, with fractal dimension DF < D, then N scales as R^(-DF). DF is known as the Minkowski-Bouligand dimension, or Kolmogorov capacity, or Kolmogorov dimension, or simply box-counting dimension. BOXCOUNT(C,'plot') also shows the log-log plot of N as a function of R (if no output argument, this option is selected by default). BOXCOUNT(C,'slope') also shows the semi-log plot of the local slope DF = - dlnN/dlnR as a function of R. If DF is contant in a certain range of R, then DF is the fractal dimension of the set C. The derivative is computed as a 2nd order finite difference (see GRADIENT). The execution time depends on the sizes of C. It is fastest for powers of two over each dimension. Examples: % Plots the box-count of a vector containing randomly-distributed % 0 and 1. This set is not fractal: one has N = R^-2 at large R, % and N = cste at small R. c = (rand(1,2048)<0.2); boxcount(c); % Plots the box-count and the fractal dimension of a 2D fractal set % of size 512^2 (obtained by RANDCANTOR), with fractal dimension % DF = 2 + log(P) / log(2) = 1.68 (with P=0.8). c = randcantor(0.8, 512, 2); boxcount(c); figure, boxcount(c, 'slope'); F. Moisy Revision: 2.10, Date: 2008/07/09 ```