Detect usage of reset signals

Specify whether to check for reset signals in the generated code

Since R2020b

Model Configuration Pane: Global Settings / Coding standards

Description

Specify whether to check for reset signals in the generated code. This check corresponds to CGSL-2.C.C.5 of the Industry standard guidelines.

To select the Detect usage of reset signals check box, set the HDL coding standard parameter to Industry.

off (default) | on

Default: Off

on: Minimize reset signals in the generated code, then check for reset signals after code generation.
off: Do not check for reset signals in the generated code.

To set this property:

Create an HDL coding standard customization object.
```
cso = hdlcoder.CodingStandard('Industry');
```
Set the RemoveResetCheck property of the HDL coding standard customization object.
For example, to check for reset signals, enter:
```
cso.RemoveResetCheck.enable = true;
```
Set the HDLCodingStandardCustomizations property to the HDL coding standard customization object, specify the coding standard, and generate code.
For example, if your DUT is sfir_fixed/symmetric_fir, enter:
```
makehdl('sfir_fixed/symmetric_fir', 'HDLCodingStandard','Industry', ...
        'HDLCodingStandardCustomizations',cso);
```

No recommended settings.

Parameter: RemoveResetCheck property of hdlcoder.CodingStandard object

Type: character vector

Values: 'on' | 'off'

Default: 'off'

Introduced in R2020b