Initialize all RAM blocks
Generate initial signal value for RAM blocks
Model Configuration Pane: Global Settings / Coding style
Description
Enable or suppress generation of initial signal value for RAM blocks. If you specify a nonzero initial value for the RAM, this setting is ignored.
Settings
on
(default) | off
Default: On
on
For RAM blocks, generate initial values of
'0'
for both the RAM signal and the output temporary signal.off
For RAM blocks, do not generate initial values for either the RAM signal or the output temporary signal.
Tips
To set this property, use the functions hdlset_param
or makehdl
. To view the property value, use
the function hdlget_param
.
This parameter applies to these RAM blocks in the HDL Coder > HDL RAMs Block Library in the Simulink Library Browser:
Dual Port RAM
Simple Dual Port RAM
Single Port RAM
Dual Rate Dual Port RAM
Recommended Settings
No recommended settings.
Programmatic Use
Parameter: InitializeBlockRAM |
Type: character vector |
Value: 'on' | 'off' |
Default: 'on' |
Version History
Introduced in R2012a