UART0
Baud rate (in bits/s)
Specify the baud for serial communication.
Settings
Default: 115200
Tx Pin
Specify the transmitting pin of UART0.
Settings
Default: PTB17
(USBTX)
Rx Pin
Specify the receiving pin of UART0.
Settings
Default: PTB16
(USBRX)
Parity
Select the type of parity checking for serial communication. This option determines whether the UART0 generates and checks for even parity or odd parity.
Settings
Default: None
None
— No parity checkingEven
— Even parity checkingOdd
— Odd parity checking
Stop bits
Select the number of Stop bits used to indicate end of a packet.
Settings
Default: 1
1
— One stop bit is transmitted to indicate the end of a byte.2
— Two stop bits are transmitted to indicate the end of a byte.