Main Content

SPI Register Write

Write data to registers of an SPI slave device

  • Library:
  • Simulink Coder Support Package for BeagleBone Blue Hardware / Communication


The SPI Register Write block writes the block input data to specified register address. To open the pin map of the BeagleBone®Blue board, click the View pin map button.



expand all

The input port to accept data to write the data to the SPI slave register.

Data Types: single | double | int8 | int16 | int32 | uint8 | uint16 | uint32 | Boolean


expand all

Select the pin number on the BeagleBone Blue board to which the SPI slave device is connected.

Select the SPI communication mode.

Enter the slave register address to write the data.

Introduced in R2018b