Get Started with Communications Toolbox Support Package for RTL-SDR Radio
Design and verify practical SDR systems using Communications Toolbox™ Support Package for RTL-SDR Radio. Support enables you to use the RTL-SDR USB radio as a standalone peripheral for receiving live RF signals.
Tutorials
- Frequency Offset Calibration for Receivers
This example shows how to measure and calibrate for the frequency offset between a transmitter and a receiver at the receiver using MATLAB® and Communications Toolbox™.
- Frequency Offset Calibration for Receivers in Simulink
This example shows how to measure and calibrate for transmitter/receiver frequency offset at the receiver using Simulink® and Communications Toolbox™.
- Spectrum Analysis of Signals
This example shows downstream spectrum analysis of signals using MATLAB®, Communications Toolbox™ and DSP System Toolbox™.
- Spectral Analysis of signals in Simulink®
This example shows how to use the captured signals, or receive signals in real time using RTL-SDR, ADALM-PLUTO or USRP™ radio, as a data source for downstream spectrum analysis with MATLAB® and Simulink®.
- FM Broadcast Receiver in Simulink
This example shows how to build an FM mono or stereo receiver using Simulink® and Communications Toolbox™.
- FRS/GMRS Receiver in Simulink
This example shows how to implement a walkie-talkie receiver using Simulink® and Communications Toolbox™.
- FRS/GMRS Walkie-Talkie Receiver
This example shows how to build a walkie-talkie receiver using MATLAB® and Communications Toolbox™.