SCI
Baudrate (in Hz)
Specify the baud for SCI communication.
Settings
Default:
115200
Receive pin
Specify a receiving pin of UART.
Settings
Default:
USBRX
Transmit pin
Specify a transmitting pin of UART.
Settings
Default:
USBTX
Data bits length
The number of data bits to transmit in a packet.
Note
This parameter appears dimmed.
Settings
Default:
8
Parity
Select the type of parity checking for SCI communication
Settings
Default:
None
Even, Odd
None — No parity checking
Even — Even parity checking
Odd — Odd parity checking
Stop bits
Select the number of Stop bits used to indicate end of a packet.
Settings
Default:
1
0.5, 1.5, 2
0.5
— The stop bit is transferred for 50% of the normal time used to transfer 1 bit.1
— One stop bit is transmitted to indicate the end of a byte.1.5
— The stop bit is transferred for 150% of the normal time used to transfer 1 bit.2
— Two stop bits are transmitted to indicate the end of a byte.
See Also
Model Configuration Parameters for STMicroelectronics STM32F4-Discovery Board | Model Configuration Parameters for STMicroelectronics STM32F746G-Discovery Board | Model Configuration Parameters for STMicroelectronics STM32L475VG-Discovery (B-L475E-IOT01A) Board