C28x Watchdog

Configure counter reset source of processor watchdog module

• 

Libraries:
C2000 Microcontroller Blockset / C2802x
C2000 Microcontroller Blockset / C2803x
C2000 Microcontroller Blockset / C2805x
C2000 Microcontroller Blockset / C2806x
C2000 Microcontroller Blockset / C280x
C2000 Microcontroller Blockset / C281x
C2000 Microcontroller Blockset / C2833x
C2000 Microcontroller Blockset / C2834x
C2000 Microcontroller Blockset / F280013x
C2000 Microcontroller Blockset / F280015x
C2000 Microcontroller Blockset / F28002x
C2000 Microcontroller Blockset / F28003x
C2000 Microcontroller Blockset / F28004x
C2000 Microcontroller Blockset / F2807x
C2000 Microcontroller Blockset / F2837xD
C2000 Microcontroller Blockset / F2837xS
C2000 Microcontroller Blockset / F2838x / C28x
C2000 Microcontroller Blockset / F28p65x

Description

This block configures the counter reset source of the watchdog module on the processor. The watchdog module, after configuration, resets the system if not serviced periodically.

Ports

Input

Input — Resets watchdog counter

scalar

When the input signal is 1, the counter is reset.

Dependencies

This parameter appears only when Watchdog counter reset source is set to Input port.

Data Types: int8 | uint8 | int16 | uint16 | int32 | uint32 | single | double | Boolean

Parameters

Watchdog counter reset source — Watchdog counter reset source

Specify via dialog (default) | Input port

The watchdog counter reset source.

• Input — Create an input port on the watchdog block. When the input signal is 1, the counter is reset.

• Specify via dialog — The watchdog timer is reset based on the Sample time value.

Sample time — Frequency at which processor resets Watchdog timer

–1 (default) | scalar

Sample time for the block in seconds. To execute this block asynchronously, set this parameter to -1.

Dependencies

This parameter appears only when Watchdog counter reset source is set to Specify via dialog.