Configure the PLL and sampling rate of ADC tile
rfDataConverter — RF data converter
RF data converter, specified as an
object. Via Ethernet, this object connects the host computer to the RF data converter on
the connected SoC device. Use the object functions and properties of this object to
configure the RF data converter.
tileId — Identifier of RF-ADC tile
Identifier of the RF-ADC tile connected to the programmable logic, specified
3. Available options for the RF-ADC tile ID vary
according to the specified RFSoC device. A tile contains several ADCs,
accessible as channels, and several shared timing units, including a clock
PLLSrc — Source clock signal of the PLL
Source clock signal of the PLL in the RF-ADC tile, specified as
"External LMK/LMX". The source
clock signal can come from either the clock in the tile or the external source.
PLLRefClk — Frequency of reference clock to PLL
Frequency of the reference clock to the PLL, specified as a positive scalar. This reference clock frequency drives the PLL in the RF-ADC tile.
samplingRate — Sampling rate
Sampling rate in MHz, specified as a positive scalar.
Introduced in R2020b