Send PING Request to Xilinx Zynq Platform
To check if the Xilinx® Zynq® hardware is properly configured, repeat the steps in Hardware Setup.
In the MATLAB® Command Window, execute:
You get 0% loss as shown in this response:
Pinging 192.168.1.101 with 32 bytes of data: Reply from 192.168.1.101: bytes=32 time=5ms TTL=64 Reply from 192.168.1.101: bytes=32 time=2ms TTL=64 Reply from 192.168.1.101: bytes=32 time=2ms TTL=64 Reply from 192.168.1.101: bytes=32 time=2ms TTL=64 Ping statistics for 192.168.1.101: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 2ms, Maximum = 5ms, Average = 2ms
After a successful
ping acknowledgement from the
hardware board, you can proceed with Command-Line Session for Xilinx Zynq Platform.