Clear Filters
Clear Filters

How to filter noisy sine sine signal using FIR filter

5 views (last 30 days)
I want to apply FIR filter to noisy sine signal but I am not sure if my programming is correct because the filtered signal that I got is not that smooth. Can somebody help me on this? Thank you in advanced!
% Sine signal with noise
Fs = input ('Enter the sampling frequency of the sine signal (Hz): ');
amp = input ('Enter the amplitude of the sine signal: ');
f = input('Enter the input frequency of the sine signal (Hz): ');
phase = input('Enter the phase of the sine signal (rad): ');
Ts = 1/Fs;
t = 0:Ts:10;
randn('state',0);
y = amp*sin((2*3.14*f*t) + phase) + 0.5*randn(size(t));
% Program for the design of Lowpass FIR filter using Hanning window
rp=input('Enter the passband ripple= ');
rs=input('Enter the stopband ripple= ');
fp=input('Enter the passband frequency= ');
fs=input('Enter the stopband frequency= ');
f=input('Enter the sampling frequency= ');
% Normalizing the frequencies
wp=2*fp/f;
ws=2*fs/f;
num=-20*log10(sqrt(rp*rs))-13;
dem=14.6*(fs-fp)/f;
n=ceil(num/dem);
n1=n+1;
%Adjusting the filter order. The order of window must be an odd number and the order of filter must be one less than that of the window
if (rem(n,2)~=0)
n1=n;
n=n-1;
end
disp('Filter ordern n= ');n
w=hann(n1);
%Calculation of filter coefficients
b=fir1(n,wp,w);
%Filtering
z=filtfilt(b,1,y);
%Plot the signal
subplot(2,1,1), plot(y), title('Sine signal with noise');
subplot(2,1,2), plot(z), title('Filtered sine signal (filter)');
figure, plot(b), title('Hanning lowpass FIR filter coefficient');
%Plott the filter response
figure, freqz(b,1,500,f);
title('Magnitude and Phase response');
As an example:
Enter the sampling frequency of the sine signal (Hz): 100
Enter the amplitude of the sine signal: 2
Enter the input frequency of the sine signal (Hz): 1
Enter the phase of the sine signal (rad): 0
Enter the passband ripple= 0.08
Enter the stopband ripple= 0.01
Enter the passband frequency= 2000
Enter the stopband frequency= 4000
Enter the sampling frequency= 10000
Filter ordern n=
n =
6

Answers (0)

Categories

Find more on Digital and Analog Filters in Help Center and File Exchange

Tags

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!