From the series: Implementing a Wireless Receiver on an FPGA
Jason Bryan, MathWorks
Frank Liu, MathWorks
Idin Motedayen-Aval, MathWorks
In the final section of this three-part series, we implement and verify the design on target hardware by doing the following:
Recorded: 29 Aug 2012
Part 1: Creating and Verifying a Baseline Wireless Transmitter and Receiver Using Simulink In Part 1 of our series, we begin by building a baseline QPSK Model using Simulink.
Part 2: Elaborating and Prototyping the Transmitter and Receiver Model In Part 2 of this three-part series, we elaborate and prototype the QPSK model built in part 1.