Control System Toolbox™ has commands for resampling dynamic system models or converting them between the continuous-time and discrete-time domains.
Live Editor Tasks
|Convert Model Rate||Convert models between continuous time and discrete time and resample models in the Live Editor|
|Convert model from continuous to discrete time|
|Convert model from discrete to continuous time|
|Resample discrete-time model|
|Upsample discrete-time models|
|Create option set for continuous- to discrete-time conversions|
|Create option set for discrete- to continuous-time conversions|
|Create option set for discrete-time resampling|
- Discretizing and Resampling Models
This example shows how to use the commands for continuous/discrete, discrete/continuous, and discrete/discrete conversions.
- Discretize a Compensator
This example shows how to convert a compensator from continuous to discrete time using several discretization methods, to identify a method that yields a good match in the frequency domain.
- Discretizing a Notch Filter
This example shows the comparison of several techniques for discretizing a notch filter.
- Improve Accuracy of Discretized System with Time Delay
This example shows how to improve the frequency-domain accuracy of a system with a time delay that is a fractional multiple of the sample time.
- Convert Discrete-Time System to Continuous Time
This example shows how to convert a discrete-time system to continuous time using
d2c, and compare the results using two different interpolation methods.
- Continuous-Discrete Conversion Methods
Choose discretization and interpolation methods for converting between continuous and discrete models.
- Upsample Discrete-Time System
This example shows how to upsample a system using both the
upsamplecommands and compare the results of both to the original system.
- Choosing a Resampling Command
Use resampling commands to change the sample time of a discrete-time system.