Digital Write

Write value to GIOB[6] or GIOB[7] pins on Texas Instruments Hercules RM57Lx microcontroller

Add-On Required: This feature requires the Embedded Coder Support Package for ARM Cortex-R Processors add-on.

• 

Libraries:
Embedded Coder Support Package for ARM Cortex-R Processors

Description

Write a logical value to the GIOB[6] or GIOB[7] pins of the Texas Instruments^® Hercules RM57Lx microcontroller based on the ARM^® Cortex^®-R processor core.

The GIOB[6] or GIOB[7] pins connect to LED 2 and LED 3 on Texas Instruments Hercules RM57Lx Launchpad hardware board, respectively.

Examples

Get Started with Embedded Coder Support Package for ARM Cortex-R Processors

Use Embedded Coder® Support Package for ARM® Cortex®-R Processors to run Simulink® models on a TI™ Hercules RM57Lx LaunchPad Development Kit.

• Open Live Script

Ports

Input

Port_1 — Logical value of selected GIO pin

nonnegative scalar

Logical value of the selected GIO pin, specified as a Simulink^® signal. This port accepts a signal of any data type and internally converts it to boolean.

Data Types: single | double | int8 | int16 | int32 | int64 | uint8 | uint16 | uint32 | uint64 | Boolean | fixed point | enumerated | bus

Parameters

To edit block parameters interactively, use the Property Inspector. From the Simulink Toolstrip, on the Simulation tab, in the Prepare gallery, select Property Inspector.

To set the block parameter value programmatically, use the set_param function.

To get the block parameter value programmatically, use the get_param function.

Pin — GIO Pin

GIOB_6 (LED 2) (default) | GIOB_7 (LED 3)

Select the GIO pin on the Texas Instruments Hercules RM57Lx Launchpad hardware board to which you want to write the logical status.

Programmatic Use

Block Parameter: Whichpin

Version History

Introduced in R2016b