Digital Port Write Peripheral Configuration

Map Digital Port Write peripherals in the Infineon AURIX model to peripheral registers in the MCU

Since R2022b

Description

View and edit the assignment of ports and pins in the Infineon^® AURIX™ model to the hardware peripherals.

Using the Peripheral Configuration for Digital Port Write, you can:

• View and edit the assignment of ports and pins.

• Check your model for any conflicts between peripherals.

×

Open the Digital Port Write Peripheral Configuration

• In the Simulink toolstrip, go to Hardware tab and click Hardware Mapping.

  

Parameters

Basic

Port number — Port number of digital write peripheral

P00 (default) | P01 | P02 | ...

Select the port number of digital write peripheral P00 through P41 on the hardware board. The available ports depends on the package class and pinout selection in the Configuration Parameters.

Select pin — Digital write pin

0 (default) | 1 | 2 | ...

Select the pin number for the selected of digital write peripheral ranging between 0 through 15 on the hardware board.

The Select pin # is the number of pins configured in the respective digital write block.

Advanced

Output mode — Digital port write output mode

Push pull (default) | Open drain

Select the output mode for the pin(s).

Note

The configuration made in the Advanced tab is applicable for all the pins selected in the Basic tab.

Speed — Digital port write speed

Speed-1 (default) | Speed-2 | Speed-3

Select the pin speed.

Note

The configuration made in the Advanced tab is applicable for all the pins selected in the Basic tab.

Voltage level — Digital port voltage level

Automotive (default) | TTL-5V | TTL-3.3V

Select the pin voltage level.

Note

The configuration made in the Advanced tab is applicable for all the pins selected in the Basic tab.

Version History

Introduced in R2022b