Main Content

Multiply-Add

Multiply-add combined operation

  • Multiply-Add block

Libraries:
HDL Coder / HDL Operations

Description

The Multiply-Add block computes the product of the first two inputs, a and b, and adds the result to the third input, c. The inputs can be vectors or scalars.

The multiplication operation is full precision, regardless of the output type. The Integer rounding mode, Output data type, and Saturate on integer overflow settings apply only to the addition operation.

Use the Multiply-Add block to map a combined multiply-add or a multiply-subtract operation to a DSP unit in your target hardware. You can select the Function setting in the Block Parameters dialog box for the Multiply-Add block.

To map to a DSP unit, specify the SynthesisTool property for your model. When you generate HDL code for your model, HDL Coder™ configures the multiply-add operation so that your synthesis tool can map to a DSP unit.

Note

Some DSP units do not have the multiply-add capability. To see if your hardware has the multiply-add capability, refer to the documentation for the hardware.

Limitations

The Multiply-Add block accepts and outputs signals of numeric data type that Simulink® supports, including fixed-point data types.

You can use matrix data types with the Multiply-Add block. When you use these types, the port dimensions of the inputs a and b must match. For example, in MATLAB®, you can perform these matrix operations:

a = [1 2; 3 4];
b = [5; 6];
c = 7;

c + (a.*b)
ans =

    12    17
    25    31
However, when you perform this multiplication in the Simulink environment, you see an error: Error in port widths or dimensions.

See Data Types Supported by Simulink.

Ports

Input

expand all

Input signal to be multiplied with input to Port b.

Data Types: single | double | int8 | int16 | int32 | uint8 | uint16 | uint32 | fixed point

Input signal to be multiplied with input to Port a.

Data Types: single | double | int8 | int16 | int32 | uint8 | uint16 | uint32 | fixed point

Input signal that gets added or subtracted to the product of a and b depending on Function setting.

Data Types: single | double | int8 | int16 | int32 | uint8 | uint16 | uint32 | fixed point

Output

expand all

Output data from the multiply-add operation.

Data Types: single | double | int8 | int16 | int32 | uint8 | uint16 | uint32 | fixed point

Parameters

expand all

Specify the function to perform a combined multiply and add or a multiply and subtract operation.

Programmatic Use

Parameter: Function
Type: string scalar | character vector
Value: "c+(a.*b)" | "c-(a.*b)" |"(a.*b)-c"
Default: 'c+(a.*b)'

Set the output data type to:

  • A rule that inherits a data type, for example, Inherit: Same as input

  • An expression that evaluates to a valid data type, for example, fixdt([],16,0)

Click the Show data type assistant button to display the Data Type Assistant dialog box, which helps you to set the Output data type parameter.

For more information, see Control Data Types of Signals.

Specify the rounding mode for fixed-point operations as either:

Ceiling

Rounds positive and negative numbers toward positive infinity. Equivalent to the MATLAB ceil function.

Convergent

Rounds number to the nearest representable value. If a tie occurs, rounds to the nearest even integer. Equivalent to the Fixed-Point Designer™ convergent function.

Floor

Rounds positive and negative numbers toward negative infinity. Equivalent to the MATLAB floor function.

Nearest

Rounds number to the nearest representable value. If a tie occurs, rounds toward positive infinity. Equivalent to the Fixed-Point Designer nearest function.

Round

Rounds number to the nearest representable value. If a tie occurs, rounds positive numbers toward positive infinity and rounds negative numbers toward negative infinity. Equivalent to the Fixed-Point Designer round function.

Simplest

Chooses between rounding toward floor and rounding toward zero to generate rounding code that is as efficient as possible.

Zero

Rounds number toward zero. Equivalent to the MATLAB fix function.

Programmatic Use

Parameter: RndMeth
Type: string scalar | character vector
Value: "Ceiling" | "Convergent" |"Floor" | "Nearest" | "Round" | "Simplest" | "Zero"
Default: 'Floor'

See Also

For more information, see Rounding Modes.

On

Overflows saturate to either the minimum or maximum value that the data type can represent.

For example, an overflow associated with a signed 8-bit integer can saturate to -128 or 127.

Off

Overflows wrap to the appropriate value that the data type can represent.

For example, the number 130 does not fit in a signed 8-bit integer and wraps to -126.

Tips

  • Consider selecting this check box when your model has a possible overflow and you want explicit saturation protection in the generated code.

  • Consider clearing this check box when you want to optimize efficiency of your generated code.

    Clearing this check box also helps you to avoid overspecifying how a block handles out-of-range signals. For more information, see Troubleshoot Signal Range Errors.

  • When you select this check box, saturation applies to every internal operation on the block, not just the output or result.

  • In general, the code generation process can detect when overflow is not possible. In this case, the code generator does not produce saturation code.

Programmatic Use

Parameter: SaturateOnIntegerOverflow
Type: string scalar | character vector
Value: "off" | "on"
Default: 'off'

Algorithms

expand all

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

Version History

Introduced in R2015b