Get Started With Hardware-Software Co-Design
R2026bDeploy generated HDL code on a target hardware platform
Design a system that you can deploy on hardware or a combination of hardware and software. Deploy your MATLAB® or Simulink® design:
As hardware and software on Altera® system-on-chip (SoC) platforms, such as Cyclone®-V SoC, Arrow® SoCKit, or Arria®-10 SoC.
On standalone Altera FPGAs, such as an Arrow Max 10 or Arria-10 FPGA boards.
If you are using an SoC platform or a platform that has a separate FPGA and processor, you can partition your design to generate hardware that targets the FPGA fabric and software that runs on the embedded processor of the target platform.
Categories
- Hardware-Software Co-Design Basics
Learn about the hardware-software co-design workflow and how to use the Workflow Advisor to run the algorithm on the SoC platform
- Design a Model for AXI4 Interfaces
Model your algorithm in Simulink by using a simplified protocol for mapping to AXI4-Stream, AXI4-Stream Video, or AXI4 Master interfaces
