Main Content

Monitor Data Value and Quality of OPC UA Nodes in Simulink

This example uses:

Open Live Script

This example shows how to implement a dashboard showing instantaneous values and quality metrics related to specific OPC Unified Architecture (UA) nodes using Simulink® blocks from Industrial Communication Toolbox™.

You can read or write data to nodes on an OPC UA server using the OPC UA Read or OPC UA Write blocks in Simulink. This example uses an OPC UA Read block to read data from two nodes on an OPC UA server and a custom dashboard to monitor the node values and quality.

Prerequisites:

Model Description

The image shows a model where an OPC UA Read block is configured to read the nodes named Counter and Sinusoid from an OPC UA server. The OPC UA Read block outputs the node values as a Simulink bus at its Value port. A Bus Selector (Simulink) block is used to demux the Simulink bus and obtain the values of individual nodes. To display the values of individual nodes, Scope blocks are attached to the outputs of the Bus Selector block. You can view the timestamp and quality of the data at the nodes by using a Display block.

Monitor OPC data with Dashboard blocks

Dashboard

Gauges to Monitor Node Values

The DataValueAndQualityIndicator model provided with this example contains a Circular Gauge (Simulink) block labeled Counter Gauge and a Vertical Gauge (Simulink) block labeled Sinusoid Gauge to monitor the node values. This example reads from two nodes named Counter and Sinusoid whose values range from 0 to 30 and -2 to 2, respectively. You can customize the scale, needle, and color scheme of the Gauge blocks. For this example, the Circular Gauge block is customized to display values ranging from 0 to 40, and the Vertical Gauge block is customized to display negative values in red and positive values in green.

Lamps to Monitor Node Data Quality

The OPC UA Read block outputs the quality of read data as Boolean values. This example reads from two nodes named Counter and Sinusoid whose quality values are monitored using Lamp (Simulink) blocks labeled as Counter Quality and Sinusoid Quality, respectively. For this example, the lamps turn green when data quality is Good and red when data quality is Bad or Uncertain. For more information, refer to Quality.

Extend the Example

This example uses Prosys OPC UA Simulation Server configured with two nodes. You can read the value and quality of node data available on any accessible OPC UA server using the OPC UA Read block. You can monitor the read data using the dashboard blocks available in the Simulink Dashboard library. You can customize the dashboard blocks based on your use case and display requirements.