Model Configuration Parameters for NXP FRDM-KL25Z Board

Hardware Implementation Pane Overview

Default Hardware Implementation Pane

Configure hardware board to run Simulink^® models.

1. In the Simulink Editor, select Simulation > Model Configuration Parameters.

2. In the Configuration Parameter dialog box, click Hardware Implementation.

3. Set the Hardware board parameter to NXP FRDM-KL25Z.

4. The parameter values under Hardware board settings are automatically populated to their default values.

   You can optionally adjust these parameters for your particular use case.

5. Click Apply to apply the changes.

For more information on selecting a hardware support package and general configuration settings, see Hardware Implementation Pane.

Build Options

Parameter	Description	Default Value
Build action	Defines how Simulink Coder™ responds when you build your model.	Build, load, and run

Clocking

Parameter	Description	Default Value
CPU Clock Frequency	The CPU clock frequency in MHz.	48

I2C0

Parameter	Description	Default Value
SCL Pin	The SCL pin for I2C communication.	PTB0
SDA Pin	The SDA pin for I2C communication.	PTB1

I2C1

Parameter	Description	Default Value
SCL Pin	The SCL pin for I2C communication.	PTE1
SDA Pin	The SDA pin for I2C communication.	PTE0

Timer/PWM

Parameter	Description	Default Value
TPM# Frequency (in Hz)	The frequency for TPM0 timer.	4166

UART0

Parameter	Description	Default Value
Baud rate (in bits/s)	The baud for UARTx serial interfaces.	115200
Tx Pin	The Tx pin for serial communication.	PTA2 (USBTX)
Rx Pin	The Rx pin for serial communication.	PTA1 (USBRX)

UART1

Parameter	Description	Default Value
Baud rate (in bits/s)	The baud for UARTx serial interfaces.	115200
Tx Pin	The Tx pin for serial communication.	PTC4
Rx Pin	The Rx pin for serial communication.	PTC3

UART2

Parameter	Description	Default Value
Baud rate (in bits/s)	The baud for UARTx serial interfaces.	115200
Tx Pin	The Tx pin for serial communication.	PTD5
Rx Pin	The Rx pin for serial communication.	PTD4

PIL

Parameter	Description	Default Value
PIL Select hardware UART	The target UART port for PIL communication.	UART0
PIL Serial port	The serial port for PIL communication.	COM1

External Mode

Parameter	Description	Default Value
Communication interface	Transport layer used to exchange data between host computer and hardware.	Serial
Select hardware UART	The target UART port for external mode communication.	UART0
Serial port	The serial port on the NXP FRDM-KL25Z hardware board.	COM27
Verbose	View external mode execution progress and updates.	on