Transport Properties Sensor (TL)

R2026b

Measure dynamic and kinematic viscosity, thermal conductivity, and Prandtl number in thermal liquid network

Since R2026a

• 

Transport Properties Sensor (TL) block

To add a block to a model, double-click the canvas and start typing the block name. Then, select the block from the list.

Libraries:
Simscape / Foundation Library / Thermal Liquid / Sensors

Description

The Transport Properties Sensor (TL) block represents an ideal sensor that measures the dynamic and kinematic viscosity, thermal conductivity, and Prandtl number in a thermal liquid network. There is no mass or energy flow through the sensor.

The block measures these properties at the node connected to port A.

Ports

Output

μ — Dynamic viscosity measurement, Pa*s

physical signal

Physical signal output port that measures the dynamic viscosity.

Dependencies

To enable this port, select the Dynamic viscosity check box.

Programmatic Use

Port: mu

ν — Kinematic viscosity measurement, m^2/s

physical signal

Physical signal output port that measures the kinematic viscosity.

Dependencies

To enable this port, select the Kinematic viscosity check box.

Programmatic Use

Port: nu

k — Thermal conductivity measurement, W/(m*K)

physical signal

Physical signal output port that measures the thermal conductivity.

Dependencies

To enable this port, select the Thermal conductivity check box.

Programmatic Use

Port: k

Pr — Prandtl number measurement, unitless

physical signal

Physical signal output port that measures the Prandtl number.

Dependencies

To enable this port, select the Prandtl number check box.

Programmatic Use

Port: Pr

Conserving

A — Sensor inlet

thermal liquid

Thermal liquid conserving port. Connect this port to the node in the thermal liquid network where you want to measure the transport properties. All measurements are taken with respect to absolute zero.

Programmatic Use

Port: A

Parameters

Dynamic viscosity — Control output port visibility to measure dynamic viscosity

On (default) | Off

Select this check box to expose output port μ, which measures the dynamic viscosity.

Programmatic Use

Parameter:	dynamic_viscosity_measure
Values:	"true" | "false"

Kinematic viscosity — Control output port visibility to measure kinematic viscosity

Off (default) | On

Select this check box to expose output port ν, which measures the kinematic viscosity.

Programmatic Use

Parameter:	kinematic_viscosity_measure
Values:	"true" | "false"

Thermal conductivity — Control output port visibility to measure thermal conductivity

Off (default) | On

Select this check box to expose output port k, which measures the thermal conductivity.

Programmatic Use

Parameter:	thermal_conductivity_measure
Values:	"true" | "false"

Prandtl number — Control output port visibility to measure Prandtl number

Off (default) | On

Select this check box to expose output port Pr, which measures the Prandtl number.

Programmatic Use

Parameter:	prandtl_number_measure
Values:	"true" | "false"

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

Version History

Introduced in R2026a