Three-Phase Series RLC Branch

Implement three-phase series RLC branch

• 

Libraries:
Simscape / Electrical / Specialized Power Systems / Passives

Description

The Three-Phase Series RLC Branch block implements three balanced branches consisting each of a resistor, an inductor, or a capacitor or a series combination of these. Use the Branch type parameter to select elements you want to include in each branch.

Negative values are allowed for resistance, inductance, and capacitance.

Ports

Conserving

A — Phase A terminal 1

specialized electrical

Specialized electrical conserving port associated with the terminal 1 of phase A.

B — Phase B terminal 1

specialized electrical

Specialized electrical conserving port associated with the terminal 1 of phase B.

C — Phase C terminal 1

specialized electrical

Specialized electrical conserving port associated with the terminal 1 of phase C.

a — Phase A terminal 2

specialized electrical

Specialized electrical conserving port associated with the terminal 2 of phase A.

b — Phase B terminal 2

specialized electrical

Specialized electrical conserving port associated with the terminal 2 of phase B.

c — Phase C terminal 2

specialized electrical

Specialized electrical conserving port associated with the terminal 2 of phase C.

Parameters

To edit block parameters interactively, use the Property Inspector. From the Simulink^® Toolstrip, on the Simulation tab, in the Prepare gallery, select Property Inspector.

Branch type — Elements to include in branch

RLC (default) | R | L | C | RL | RC | LC | Open circuit

Elements you want to include in the branch. The R letter defines the resistor, the L letter defines the inductor, and the C letter defines the capacitor. Select Open circuit to define an open circuit (R=0, L=0, C=inf). Only existing elements are displayed in the block icon.

Resistance R (Ohms) — Branch resistances

1 (default) | scalar

Branch resistances, in ohms (Ω).

Inductance L (H) — Branch inductances

1e-3 (default) | scalar

Branch inductances, in henries (H).

Capacitance C (F) — Branch capacitances

1e-6 (default) | scalar

Branch capacitances, in farads (F).

Measurements — Block measurements

None (default) | Branch voltages | Branch currents | Branch voltages and currents

Select Branch voltages to measure the three voltages across the Three-Phase Series RLC Branch block terminals.

Select Branch currents to measure the three currents flowing through the Three-Phase Series RLC Branch block.

Select Branch voltages and currents to measure the three voltages and the three currents of the Three-Phase Series RLC Branch block.

Place a Multimeter block in your model to display the selected measurements during the simulation. In the Available Measurements list box of the Multimeter block, the measurements are identified by a label followed by the block name.

Measurement	Label
Branch voltages	Ua:
Branch currents	Ia:

Extended Capabilities

C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.

Version History

Introduced before R2006a