How to filter table by variable ?
6 views (last 30 days)
Show older comments
Hi guys can u help me to solve this problem. Im trying to filter my table named jointbase only for number of rows that specified in VariantIDPassed. Thanks
clear;
clc;
H = 5;
L = 15;
Ns = 2;
Nb = 1;
PortalHeight = H;
Bayspan = L;
NumberStory = Ns;
NumberBay = Nb;
% Variable1
h = [0.8,1.00,1.20,1.40,1.6,1.80];
% Variable2
Lss = [2.00,2.40,2.80,3.20,3.60,4.00];
% Variable3
Nss = [2,3,4];
% Definition
Var1HeightofTrussBeam = h;
Var2LengthSpecialSegment = Lss;
Var3NumberSpecialSegment = Nss;
% % Xbase = zeros(1,length(Totalvariant));
% % Zbase = zeros(1,length(Totalvariant));
% % Xcol = zeros(1,length(Totalvariant));
% % Zcol = zeros(1,length(Totalvariant));
% % Xos = zeros(1,length(Totalvariant));
% % Zos = zeros(1,length(Totalvariant));
% % Xss = zeros(1,length(Totalvariant));
% % Zss = zeros(1,length(Totalvariant));
% % X = zeros(1,length(Totalvariant));
% % Z = zeros(1,length(Totalvariant));
% % jointbase = zeros(1,length(Totalvariant));
% % jointcolumn = zeros(1,length(Totalvariant));
% % jointordinarysegment = zeros(1,length(Totalvariant));
% % jointtopordinarysegment = zeros(1,length(Totalvariant));
% % jointbottomordinarysegment = zeros(1,length(Totalvariant));
% % jointspecialsegment = zeros(1,length(Totalvariant));
% % jointtopspecialsegment = zeros(1,length(Totalvariant));
% % jointbottomspecialsegment = zeros(1,length(Totalvariant));
ijk = 0;
for i = 1:numel(h)
for j = 1:numel(Lss)
for k = 1:numel(Nss)
ijk = ijk+1;
Variantmodel{ijk,:} = table(ijk,h(i),Lss(j),Nss(k),'VariableNames',{'VariantID','Height','Length','Number'});
%% Base(base)
Xbase{ijk,:} = L*(0:NumberBay);
Zbase{ijk,:} = repelem(0,1,length(Xbase{ijk,:}));
%% Column(col)
Xcolumn = L*(0:NumberBay);
Zcolumn = repelem(H*(1:NumberStory),1,length(Xcolumn));
Xbotbeam = L*(0:NumberBay);
Zbotbeam = repelem((H*(1:NumberStory)-h(i)),1,length(Xbotbeam));
% replicate [X] to be the same size as [Z] for plotting:
Xcol{ijk,:} = repmat([Xcolumn,Xbotbeam],1,NumberStory);
Zcol{ijk,:} = [Zcolumn,Zbotbeam];
%% Ordinary Segment
% calculate span length of ordinary segment
Los = (L-Lss(j))/2;
Nos = Los/h(i);
Nos = round(Nos);
los = Los/Nos;
totalspan{ijk,:} = los*Nos*2+Lss(j);
if totalspan{ijk,:} == 15.000
checkspan{ijk,:} = "correct span";
else
checkspan{ijk,:} = "span must be 15m";
end
% top and bottom joint of ordinary segment(os)
XTopOrdinarySegment = reshape([los*(1:Nos),(L/2+Lss(j)/2)+los*(0:Nos-1)].'+L*(0:(NumberBay-1)),1,[]);
XBottomOrdinarySegment = XTopOrdinarySegment;
ZTopOrdinarySegment = repelem(H*(1:NumberStory),1,2*Nos*NumberBay);
ZBottomOrdinarySegment = repelem(H*(1:NumberStory)-h(i),1,2*Nos*NumberBay);
% replicate [X] to be the same size as [Z] for plotting:
Xos{ijk,:} = repmat([XTopOrdinarySegment,XBottomOrdinarySegment],1,NumberStory);
Zos{ijk,:} = [ZTopOrdinarySegment,ZBottomOrdinarySegment];
%% Special Segment
% calculate span length of special segment
lss = Lss(j)/Nss(k);
% top and bottom joint of special segment(ss)
XTopSpecialSegment = reshape((lss*(0:Nss(k))+L/2-Lss(j)/2).'+L*(0:(NumberBay-1)),1,[]);
XBottomSpecialSegment = XTopSpecialSegment;
ZTopSpecialSegment = repelem(H*(1:NumberStory),1,length(XTopSpecialSegment));
ZBottomSpecialSegment = repelem(H*(1:NumberStory)-h(i),1,length(XBottomSpecialSegment));
% replicate [X] to be the same size as [Z] for plotting:
Xss{ijk,:} = repmat([XTopSpecialSegment,XBottomSpecialSegment],1,NumberStory);
Zss{ijk,:} = [ZTopSpecialSegment,ZBottomSpecialSegment];
%% Plot Joint
X{ijk,:} = [Xbase{ijk,:},Xcol{ijk,:},Xos{ijk,:},Xss{ijk,:}];
Z{ijk,:} = [Zbase{ijk,:},Zcol{ijk,:},Zos{ijk,:},Zss{ijk,:}];
scatter(X{ijk,:},Z{ijk,:},'filled'),grid on
%check angle
tangent = (Lss(j)/Nss(k))/h(i);
anglespecialsegment(ijk) = atand(tangent);
%% Name Joint
jointbase{ijk} = table((1:numel(Xbase{ijk,:}))',Xbase{ijk,:}',Zbase{ijk,:}','VariableNames',{'ID','X','Z'});
jointcolumn{ijk} = table((max(jointbase{ijk}.ID)+1:numel(Xcol{ijk,:})+max(jointbase{ijk}.ID))',Xcol{ijk,:}',Zcol{ijk,:}','VariableNames',{'ID','X','Z'});
jointordinarysegment{ijk} = table((max(jointcolumn{ijk}.ID)+1:numel(Xos{ijk,:})+max(jointcolumn{ijk}.ID))',Xos{ijk,:}',Zos{ijk,:}','VariableNames',{'ID','X','Z'});
jointtopordinarysegment{ijk} = jointordinarysegment{ijk}(ismember(jointordinarysegment{ijk}.Z,Zcolumn),:);
jointbottomordinarysegment{ijk} = jointordinarysegment{ijk}(ismember(jointordinarysegment{ijk}.Z,Zbotbeam),:);
jointspecialsegment{ijk} = table((max(jointbottomordinarysegment{ijk}.ID)+1:numel(Xss{ijk,:})+max(jointbottomordinarysegment{ijk}.ID))',Xss{ijk,:}',Zss{ijk,:}','VariableNames',{'ID','X','Z'});
jointtopspecialsegment{ijk} = jointspecialsegment{ijk}(ismember(jointspecialsegment{ijk}.Z,Zcolumn),:);
jointbottomspecialsegment{ijk} = jointspecialsegment{ijk}(ismember(jointspecialsegment{ijk}.Z,Zbotbeam),:);
end
end
end
tablecheck = table((1:numel(anglespecialsegment))',totalspan,anglespecialsegment','VariableNames',{'VariantID','Total Span','Angle'});
VariantIDPassed = tablecheck.VariantID(tablecheck.Angle>=30 & tablecheck.Angle<=60);
jointbase = table((1:numel(jointbase))',jointbase','VariableNames',{'VariantID','Joint Base'});
jointbase = jointbase(jointbase.VariantID==VariantIDPassed,:)
0 Comments
Accepted Answer
More Answers (0)
See Also
Categories
Find more on Develop Apps Using App Designer in Help Center and File Exchange
Products
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!