555W solar water pumping system with P&O MPPT Controller

Hello, Thanks for the previous comments regarding 555W Solar water pumping system with P&O MPPT controller, Case 1. There are still few challenges i want to address so that i can get help.

The main challenge is in boost converter, with P&O MPPT controller i am able to attain 555 W peak from solar panel at input voltage of 42V, Output voltage of boost converter (Dc link voltage) is required to be 100V for the induction motor to receive full power but currently the Dc link voltage is maintained at 52V where power received by motor is just around 409 W,

Why does the boost converter is not able to boost voltage up to required value of 100V for the motor to receive full power?

I will attach the P&O MPPT algorithm used and SPWM for motor speed control ,also i have uploaded simulink file of my system

function d = dutyCycle(Vpv, Ipv)
persistent Vpre Ppre dpre 
if isempty(dpre)
    Vpre = 0;
    Ppre = 0;
    dpre = 0.70;   % Initial duty ratio    
end 
% Parameters
DeltaD  = 0.005;        % Step size for MPPT

% Calculate current power
Ppv = Vpv * Ipv;
if (Ppv >= Ppre)
    if (Vpv > Vpre)
        d = dpre - DeltaD;
    else
        d = dpre + DeltaD;
    end
else
    if (Vpv > Vpre)
        d = dpre + DeltaD;
    else
        d = dpre - DeltaD;
    end
end

%cle between 0 and 1
d = max(min(d,0.92),0.1);
% Update persistent variables
Vpre = Vpv;
Ppre = Ppv;
dpre = d;
end