The "Analog Input" block has timed out while trying to synchronize to real-time kernel
1 view (last 30 days)
Show older comments
Hi,
we are working with NI hardware for analog I/O and everything worked fine, when we run in real-time normal mode.
For some unknown reason several of the computers have started to fail with the following error message: " The "Analog Input" block has timed out while trying to synchronize to real-time kernel "
We can not find any information on this problem. When using the NI tests and diagnostics, the hardware works fine.
Any suggestions?
Thanks Wolfgang
0 Comments
Answers (1)
Jan Houska
on 13 Dec 2012
This is likely because the real-time kernel runs at slower rate than it should or has not started at all. The most frequent cause of this behavior is aggressive power saving, so please first look for power saving options and choose maximum performance, especially for CPU. Sometimes, it is necessary to go to BIOS settings and disable EIST or C1E. These are CPU power saving methods and "disabling" means "setting to maximum performance, no power saving".
If this does not help, you should probably go to tech support.
See Also
Categories
Find more on Target Computer Setup in Help Center and File Exchange
Products
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!