Problem 45413. Characterize fluid flow in a pipe as to laminar or turbulent

Created by Karl Ezra Pilario

Solve Later

{"relationships":[{"relationshipType":"http://schemas.mathworks.com/matlab/code/2013/relationships/document","targetMode":"","relationshipId":"rId1","target":"/matlab/document.xml"},{"relationshipType":"http://schemas.mathworks.com/matlab/code/2013/relationships/output","targetMode":"","relationshipId":"rId2","target":"/matlab/output.xml"}],"parts":[{"partUri":"/matlab/document.xml","relationship":[],"contentType":"application/vnd.mathworks.matlab.code.document+xml","content":"<?xml version=\"1.0\" encoding=\"UTF-8\"?>\n<w:document xmlns:w=\"http://schemas.openxmlformats.org/wordprocessingml/2006/main\"><w:body><w:p><w:pPr><w:pStyle w:val=\"text\"/></w:pPr><w:r><w:t>In fluid mechanics, characterizing the flow in a pipe is essential to predicting its behavior. The flow pattern can either be laminar (smooth/sheet-like), turbulent (rough/chaotic), or transitioning from laminar to turbulent. Intuitively, flow velocity is a dominant factor in determining the flow pattern: A slow-moving fluid is laminar, while a fast-moving one is turbulent. However, the flow pattern can also be influenced by pipe geometry, fluid viscosity, and fluid density.</w:t></w:r></w:p><w:p><w:pPr><w:pStyle w:val=\"text\"/></w:pPr><w:r><w:t>Hence, instead of just flow velocity, engineers are using a number that better indicates the flow pattern called the Reynolds Number,</w:t></w:r><w:r><w:t> </w:t></w:r><w:r><w:rPr><w:b/></w:rPr><w:t>Re</w:t></w:r><w:r><w:t>. For a fluid flowing inside a circular pipe,</w:t></w:r><w:r><w:t> </w:t></w:r><w:r><w:rPr><w:b/></w:rPr><w:t>Re</w:t></w:r><w:r><w:t> is computed as follows:</w:t></w:r></w:p><w:p><w:pPr><w:pStyle w:val=\"code\"/></w:pPr><w:r><w:t><![CDATA[Re = D x v x rho / mu\n where:\n D = inside diameter of the pipe [m]\n v = mean flow velocity [m/s]\n rho = fluid density [kg/m^3]\n mu = fluid viscosity [Pa.s] or [kg/m/s]]]></w:t></w:r></w:p><w:p><w:pPr><w:pStyle w:val=\"text\"/></w:pPr><w:r><w:t>Note: Although it is not customary to use SI units for these quantities, this problem deals with SI units for ease.</w:t></w:r></w:p><w:p><w:pPr><w:pStyle w:val=\"text\"/></w:pPr><w:r><w:t>We can then adopt the following rule: If</w:t></w:r><w:r><w:t> </w:t></w:r><w:r><w:rPr><w:b/></w:rPr><w:t>Re</w:t></w:r><w:r><w:t> &lt; 2300, the flow is laminar; if</w:t></w:r><w:r><w:t> </w:t></w:r><w:r><w:rPr><w:b/></w:rPr><w:t>Re</w:t></w:r><w:r><w:t> &gt; 2900, the flow is turbulent; otherwise, the flow is in transition.</w:t></w:r></w:p><w:p><w:pPr><w:pStyle w:val=\"text\"/></w:pPr><w:r><w:t>Write a function that accepts a MATLAB variable, x, which is always a 4-element row vector containing the values (in SI) of</w:t></w:r><w:r><w:t> </w:t></w:r><w:r><w:rPr><w:rFonts w:cs=\"monospace\"/></w:rPr><w:t>D</w:t></w:r><w:r><w:t>,</w:t></w:r><w:r><w:t> </w:t></w:r><w:r><w:rPr><w:rFonts w:cs=\"monospace\"/></w:rPr><w:t>v</w:t></w:r><w:r><w:t>,</w:t></w:r><w:r><w:t> </w:t></w:r><w:r><w:rPr><w:rFonts w:cs=\"monospace\"/></w:rPr><w:t>rho</w:t></w:r><w:r><w:t>, and</w:t></w:r><w:r><w:t> </w:t></w:r><w:r><w:rPr><w:rFonts w:cs=\"monospace\"/></w:rPr><w:t>mu</w:t></w:r><w:r><w:t> in that order. Output the appropriate string among 'LAMINAR', 'TRANSITION', or 'TURBULENT', according to the rule above.</w:t></w:r></w:p><w:p><w:pPr><w:pStyle w:val=\"text\"/></w:pPr><w:r><w:t>See sample test cases:</w:t></w:r></w:p><w:p><w:pPr><w:pStyle w:val=\"code\"/></w:pPr><w:r><w:t><![CDATA[>> flow_pattern([0.02 0.1 1000 8.9e-4])\nans =\n 'LAMINAR'\n>> flow_pattern([0.02 0.5 1000 8.9e-4])\nans =\n 'TURBULENT'\n>> flow_pattern([0.02 0.1 1200 8.9e-4])\nans =\n 'TRANSITION']]></w:t></w:r></w:p></w:body></w:document>"},{"partUri":"/matlab/output.xml","contentType":"text/xml","content":"<?xml version=\"1.0\" encoding=\"UTF-8\" standalone=\"no\" ?><embeddedOutputs><metaData><evaluationState>manual</evaluationState><layoutState>code</layoutState><outputStatus>ready</outputStatus></metaData><outputArray type=\"array\"/><regionArray type=\"array\"/></embeddedOutputs>"}]}

In fluid mechanics, characterizing the flow in a pipe is essential to predicting its behavior. The flow pattern can either be laminar (smooth/sheet-like), turbulent (rough/chaotic), or transitioning from laminar to turbulent. Intuitively, flow velocity is a dominant factor in determining the flow pattern: A slow-moving fluid is laminar, while a fast-moving one is turbulent. However, the flow pattern can also be influenced by pipe geometry, fluid viscosity, and fluid density.Hence, instead of just flow velocity, engineers are using a number that better indicates the flow pattern called the Reynolds Number, Re. For a fluid flowing inside a circular pipe, Re is computed as follows:<pre class="language-matlab">Re = D x v x rho / mu
 where:
 D = inside diameter of the pipe [m]
 v = mean flow velocity [m/s]
 rho = fluid density [kg/m^3]
 mu = fluid viscosity [Pa.s] or [kg/m/s]
</pre>Note: Although it is not customary to use SI units for these quantities, this problem deals with SI units for ease.We can then adopt the following rule: If Re &lt; 2300, the flow is laminar; if Re &gt; 2900, the flow is turbulent; otherwise, the flow is in transition.Write a function that accepts a MATLAB variable, x, which is always a 4-element row vector containing the values (in SI) of <tt>D</tt>, <tt>v</tt>, <tt>rho</tt>, and <tt>mu</tt> in that order. Output the appropriate string among 'LAMINAR', 'TRANSITION', or 'TURBULENT', according to the rule above.See sample test cases:<pre class="language-matlab">&gt;&gt; flow_pattern([0.02 0.1 1000 8.9e-4])
ans =
 'LAMINAR'
&gt;&gt; flow_pattern([0.02 0.5 1000 8.9e-4])
ans =
 'TURBULENT'
&gt;&gt; flow_pattern([0.02 0.1 1200 8.9e-4])
ans =
 'TRANSITION'
</pre>

Solve

Solution Stats

69 Solutions
32 Solvers

Last Solution submitted on Sep 08, 2020

Last 200 Solutions

Problem Recent Solvers32

Problem Tags

chemical engineering if reynolds

Problem 45413. Characterize fluid flow in a pipe as to laminar or turbulent

Solution Stats

Last 200 Solutions

Problem Recent Solvers32

Suggested Problems

More from this Author19

Problem Tags

Problem 45413. Characterize fluid flow in a pipe as to laminar or turbulent

Solution Stats

Last 200 Solutions

Problem Recent Solvers32

Suggested Problems

More from this Author19

Problem Tags

Players