MATLAB Central Discussions - Join the conversation!
Main Content

Results for


This is the 6th installment of the wish-list and bug report thread.
This topic is the follow on to the first Wish-list for MATLAB Answer sections and second MATLAB Answers Wish-list #2 (and bug reports). The third started out as New design of the forum - grey on white and the fourth and fifth also grew so large they are slow to load and navigate.
Same idea as the previous ones: one wish (or bug report) per answer, so that people can vote their wishes.
What should you post where?
Wishlist threads (#1 #2 #3 #4 #5 #6): bugs and feature requests for Matlab Answers
Frustation threads (#1 #2): frustations about usage and capabilities of Matlab itself
Missing feature threads (#1 #2): features that you whish Matlab would have had
Next Gen threads (#1): features that would break compatibility with previous versions, but would be nice to have
@anyone posting a new thread when the last one gets too large (about 50 answers seems a reasonable limit per thread), please update this list in all last threads. (if you don't have editing privileges, just post a comment asking someone to do the edit)
When solving problems over on Cody, I can almost always view all solutions to a problem after submitting a correct solution of my own. Very rarely, however, this is not the case, and I instead get the following message:
This solution is locked. To view this solution, you need to provide a solution of the same size or smaller.
You may solve another problem from Community group to unlock all the solutions to this problem.
If this happens, then again, I can almost always rectify this by submitting a (correct) solution to a different problem (I take it that the Community group is the implicit group of all problems on Cody --- is it?). But sometimes that, too, fails.
So my question is, why? What are the criteria that determine when all solutions are, in fact, unlocked?
(There is a related question here, but I feel the posted answer does not answer the question.)
Simple question: I noticed there's a Modeling & Simulation Challenge Master badge over on Cody, but I can't find the corresponding group. So: where is it? Does it still exist at all?
Error: The server timed out while running and assessing your solution in MATLAB CODY. How do I resolve this? My code is correct. I have run it on PC. But, when i submit in CODY the server throws an error.
I've now seen linear programming questions pop up on Answers recently, with some common failure modes for linprog that people seem not to understand.
One basic failure mode is an infeasible problem. What does this mean, and can it be resolved?
The most common failure mode seems to be a unbounded problem. What does this mean? How can it be avoided/solved/fixed? Is there some direction I can move where the objective obviously grows without bounds towards +/- inf?
Finally, I also see questions where someone wants the tool to produce all possible solutions.
A truly good exposition about linear programming would probably result in a complete course on the subject, and Aswers is limited in how much I can write (plus I'll only have a finite amount of energy to keep writing.) I'll try to answer each sub-question as separate answers, but if someone else would like to offer their own take, feel free to do so as an answer, since it has been many years for me since I learned linear programming.
Just in case, I have my license of MATLAB. I just have this question and I didn't find any information. I wouldn't like to create another account, for this reason I prefer to ask here.
I have submitted a problem in cody some days back. Now it is not showing in my profile. Initially it was accepted and some people submitted the solutions also, however It has been removed after that, are there some guidelines which I am not following?
This is not a question, but a point of discussion for the entire community. I am aware that every 1/2 months this theme comes out, but until this is not fixed it is totally necessary that this comes, indeed, out. And I said "fix" because Mathworks has to understand that a dark theme is not only a visual/aesthetic matter, it is a substantial part of the game. Most of the OS, GUIs, programs are actually in dark mode, and a vast majority of the users makes indeed use of a global dark mode. How much one does like it is personal, but the benefits to power savings and eye health is instead a fact. Mathworks being ignoring this for years is nothing but ridiculous. Of course it is not an easy task, but every minute of committment for it is worthy. And nope, Schemer is not helpful because it does not provide a real fix to this question.
I feel free to suggest something similar to the Spyder's dark theme, which came out like 2 years ago if I remember correctly.
Of course, my point is not being disrespectful (I am instead very respectful to the huge efforts of Mathworks for making this wonderful program run). But, form a user's point of view, the fact that not a single word has so far come out from Mathworks about a dark theme (meaning that for sure we will not see it in a timing of months) requires us to put a strong pressure on this.
Mathworks, please: it's time for a dark theme.
Hi everyone
I am a new of this community and I very interested in this forum and Matlab.I am trying to submit a soultion but as tiltle my code has a built-in function so the test systerm dont reconisie it.It run completely ok on my computer.
This is problem
This is my solution
function [boOut] = BoIfPointInPoly(PolyMatrix,p_test)
%Summary of this function goes here
%{
if we draw a line from test point to a central point of a side of The polygon
then we extend that line to the furthest point of the polygon ensure that
line go through all side of Polygon in 1 direction.I call that line is line_test
Next find number of intersert of line test and all sides w polyxpoly
function
num interset point is odd mean p_test inside
num interset point is even mean p_test outside
this solution go from the concept that if a line go in from a side it has go out
from other side.So if it go in but not go out that mean it start from
inside.
%}
% Detailed explanation goes here
%line from p test throuh central of a side to furthest point of polygon
%find vector
V = ((PolyMatrix(1,:) + PolyMatrix(2,:)) /2) - p_test ;
%draw that vector to furtest point
pend = p_test + V * max(PolyMatrix(:));
%with multi of V and biggest element I assume that line will go all out the
%polygon which ensure out logic will right
line_test = [p_test ; pend];
disp('Our line test\n');
disp(line_test);
%find interst point
p_inter = polyxpoly(PolyMatrix(:,1),PolyMatrix(:,2),line_test(:,1),line_test(:,2));
%find number of interset (row)
[numIntere,trash] = size(p_inter);
disp('Number of interest point:');
disp(numIntere);
%determine in or out
if (rem(numIntere,2) == 0)
boOut = 0;
else
boOut = 1;
end
end
Can anyone has solution.
Introduction
Comma-separated lists are really very simple. You use them all the time. Here is one:
a,b,c,d
That is a comma-separated list containing four variables, the variables a, b, c, and d. Every time you write a list separated by commas then you are writing a comma-separated list. Most commonly you would write a comma-separated list as inputs when calling a function:
fun(a,b,c,d)
or as arguments to the concatenation operator or cell construction operator:
[a,b,c,d]
{a,b,c,d}
or as function outputs:
[a,b,c,d] = fun();
It is very important to understand that in general a comma-separated list is NOT one variable (but it could be). However, sometimes it is useful to create a comma-separated list from one variable (or define one variable from a comma-separated list), and MATLAB has several ways of doing this from various container array types:
1) from a field of a structure array using dot-indexing:
struct_array.field % all elements
struct_array(idx).field % selected elements
2) from a cell array using curly-braces:
cell_array{:} % all elements
cell_array{idx} % selected elements
3) from a string array using curly-braces:
string_array{:} % all elements
string_array{idx} % selected elements
Note that in all cases, the comma-separated list consists of the content of the container array, not subsets (or "slices") of the container array itself (use parentheses to "slice" any array). In other words, they will be equivalent to writing this comma-separated list of the container array content:
content1, content2, content3, .. , contentN
and will return as many content arrays as the original container array has elements (or that you select using indexing, in the requested order). A comma-separated list of one element is just one array, but in general there can be any number of separate arrays in the comma-separated list (zero, one, two, three, four, or more). Here is an example showing that a comma-separated list generated from the content of a cell array is the same as a comma-separated list written explicitly:
>> C = {1,0,Inf};
>> C{:}
ans =
1
ans =
0
ans =
Inf
>> 1,0,Inf
ans =
1
ans =
0
ans =
Inf
How to Use Comma-Separated Lists
Function Inputs: Remember that every time you call a function with multiple input arguments you are using a comma-separated list:
fun(a,b,c,d)
and this is exactly why they are useful: because you can specify the arguments for a function or operator without knowing anything about the arguments (even how many there are). Using the example cell array from above:
>> vertcat(C{:})
ans =
1
0
Inf
which, as we should know by now, is exactly equivalent to writing the same comma-separated list directly into the function call:
>> vertcat(1,0,Inf)
ans =
1
0
Inf
How can we use this? Commonly these are used to generate vectors of values from a structure or cell array, e.g. to concatenate the filenames which are in the output structure of dir:
S = dir(..);
F = {S.name}
which is simply equivalent to
F = {S(1).name, S(2).name, S(3).name, .. , S(end).name}
Or, consider a function with multiple optional input arguments:
opt = {'HeaderLines',2, 'Delimiter',',', 'CollectOutputs',true);
fid = fopen(..);
C = textscan(fid,'%f%f',opt{:});
fclose(fid);
Note how we can pass the optional arguments as a comma-separated list. Remember how a comma-separated list is equivalent to writing var1,var2,var3,..., then the above example is really just this:
C = textscan(fid,'%f%f', 'HeaderLines',2, 'Delimiter',',', 'CollectOutputs',true)
with the added advantage that we can specify all of the optional arguments elsewhere and handle them as one cell array (e.g. as a function input, or at the top of the file). Or we could select which options we want simply by using indexing on that cell array. Note that varargin and varargout can also be useful here.
Function Outputs: In much the same way that the input arguments can be specified, so can an arbitrary number of output arguments. This is commonly used for functions which return a variable number of output arguments, specifically ind2sub and gradient and ndgrid. For example we can easily get all outputs of ndgrid, for any number of inputs (in this example three inputs and three outputs, determined by the number of elements in the cell array):
C = {1:3,4:7,8:9};
[C{:}] = ndgrid(C{:});
which is thus equivalent to:
[C{1},C{2},C{3}] = ndgrid(C{1},C{2},C{3});
Further Topics:
MATLAB documentation:
Click on these links to jump to relevant comments below:
Dynamic Indexing (indexing into arrays with arbitrary numbers of dimensions)
Nested Structures (why you get an error trying to index into a comma-separated list)
Summary
Just remember that in general a comma-separated list is not one variable (although they can be), and that they are exactly what they say: a list (of arrays) separated with commas. You use them all the time without even realizing it, every time you write this:
fun(a,b,c,d)
I'm trying to solve one problem in Cody, but a function 'fmincon' is not recognized by the online compiler. Is there any way to use functions in optimization toolbox in Cody?
I already solved some problems in Cody, why does he not increase my points or allow me to earn badges?
I need to put a number of problems on MATLAB cody under same Problem group, as many other people have done.
Can anyone please help me on this.
Let's say MathWorks decides to create a MATLAB X release, which takes a big one-time breaking change that abandons back-compatibility and creates a more modern MATLAB language, ditching the unfortunate stuff that's around for historical reasons. What would you like to see in it?
I'm thinking stuff like syntax and semantics tweaks, changes to function behavior and interfaces in the standard library and Toolboxes, and so on.
(The "X" is for major version 10, like in "OS X". Matlab is still on version 9.x even though we use "R20xxa" release names now.)
What should you post where?
Wishlist threads (#1 #2 #3 #4 #5): bugs and feature requests for Matlab Answers
Frustation threads (#1 #2): frustrations about usage and capabilities of Matlab itself
Missing feature threads (#1 #2): features that you whish Matlab would have had
Next Gen threads (#1): features that would break compatibility with previous versions, but would be nice to have
@anyone posting a new thread when the last one gets too large (about 50 answers seems a reasonable limit per thread), please update this list in all last threads. (if you don't have editing privileges, just post a comment asking someone to do the edit)
I created a problem in Cody that approximates e. To test the user's solution, I compare their solution to e. What I want to do instead is compare the user's solution to my reference solution. The question is how do I call the reference solution in the test suite?
This is currently my test suite.
sol=exp(1);
y_correct = playgame();
assessVariableEqual('y_correct',sol);
I created several problems recently in CODY. Some of them got removed automatically. I was curious as to why.
It is possible that the problems used latex in their description, so I am not sure if that was the reason they got rejected by the cody server.
I created some problems last night and created a group too. All those are now missing.
Also my ranking progress, activites, badges earned last night are missing too.
Hi all,
I hope everyone is doing well and keeping safe. I was wondering, are there any Cody challenges for Simulink these days?
I saw a post from 2015 (https://blogs.mathworks.com/simulink/2015/08/07/modeling-and-simulation-challenge-in-cody/) and it seems there was a Simulink or "Modeling and Simulation Challenge" problem group, but I couldn't find this group anymore. Perhaps I missing something?
Thank you beforehand.
Tungky
Is anyone else disappointed with uifigures? It seems apparent that these will eventually replace traditional figures, but there is still so much that doesn't quite work. I've tinkered with uifigures since their introduction in release 2016a, but even in 2020a I can't reliably export a uifigure to a graphics file. Sure it works sometimes, but not if a uipanel is present. The exportgraphics command is not as powerful as the print command, leaving some graphic formats (such as *.svg and *.eps) unsupported. How do you generate graphic files of a specific size? You can't even use subplots without overriding the default AutoResizeChildren setting!
Everything with uifigures seems to be slower and less stable than the figure variant. App Designer is much better than GUIDE, but that is not exactly high praise. I would rather generate "apps" programatically across several files instead of dealing with a single-file class definition containing 1000+ lines.
Where is this transition going? MATLAB graphics are moving away from Java in favor of JavaScript, and I'm not sure that we are at all ready for that.
I see this solution on the Cody solutions list. Solution 1949216
I am puzzled as to how this could possibly be rated as correct (size 48)
(BTW - I am pretty sure I saw this, or similar, before.)
function ans = fileread(varargin)
' ';
a=1;
b=3;
a=1;
b=3;a=1;
b=3;a=1;
b=3;a=1;
b=3; end
Go to top of page