Results for
Hi every one. I am new to thingspeak. I want to share data between my siemens PLC and thingspeak channel without any use of PC. Cna anyone help me out with the ways of communication and harware needed for the application.
Note: I have created channel in thingspeak website. I need support for siemens PLC programming for data sharing.
Pls guide me.
Hi there!
There is a question, is it possible to send plot data from my channel to telegram bot as image file using ThingSpeak API or some other tools?
I have a Free subscription which I have upgraded (paid for) to Home with one unit. My subscription is still working on Free with 15 second writes. What do I have to do to be able to update at one second intervals. I have deleted three of the four Free channells.
Hi!
I'm currently doing my third-year studies in Electrical and Electronics Engineering at the South Eastern University of Sri Lanka, I tried to get MATLAB via my student mail id, but Unfortunately, I cannot get the installation software, Can anyone give me any ideas to register for this opportunity?
I receive and visualize data from my weather station. (This is my channel: https://thingspeak.com/channels/1700157).
I want to know and show the date of last time it rained.
How can i do it? The data are updated every 15 minutes.
How to send an audio signal to thingspeak to be accessed later via HTTP protocol? it's possible ? Do you have an example you can share?
Dear Community, I using the free/community edition and I would like to know how long my data will remain accessible/stored in ThingSpeak.
I'm planning to store data for many years. Before making this a reality, I would like to be sure I have selected the correct plaform.
Thanks a lot ;)
Hopefully you are aware that MATLAB is built into ThingSpeak. Right now, MathWorks is hosting two contentsthat can help you learn MATLAB and then improve your IoT project.
I just set a calendar reminder to do a Cody problem each day. I can't win a prize but I can still get a virtual badge if I get a streak going.
hello :
I'm success using http send/receive between 16 bits MCU and Thingspeak.com via wifi , lan (ESP32(wifi) and LAN module )
but recently I have a new device it's BC95-B8 NBIOT device from quectel which it can only use UDP mode.
I want to connect / send /receive data with Thingspeak.com . but can't find any knowledge explain how to
Please advise
Thanks
I am working on a LoRaWAN project. My setup consists of 100 or more end-devices talking to a network server through a single gateway (private). My problem now is this.
I want the end-devices to belong to one of four groups with each group having a fixed range of spreading factors that can be used. Eg group 1 can only use SF 12, group 2 can only use SF 7, and so on. When an end device sends a join request, the network server should know which group the end device belongs to so it can assign the correct transmission parameter.
How can I achieve this? How can I encode the group that each end device belongs to into the join request for the network server, using maybe the AppEui or DevEui or AppKey or something? Any ideas?
Hello, I run a weather station that consists of several sensors. Sensor1 supplies external weather data, Sensor2 internal room data and Sensor3 particulate matter values.
Can I display the variables of all sensors in a "Weather Station" channel and display them in charts?
If so, how do I do that with ThingSpeak?
Many Thanks
I wanted to ask that can we send bulk data through ThingSpeak ESP32 library using:
POST /channels/266256/bulk_update.csv HTTP/1.1
Host: api.thingspeak.com
Content-Type: application/x-www-form-urlencoded
time_format: relative
I saw it on mathswork "Bulk-Write CSV Data" (link: https://www.mathworks.com/help/thingspeak/bulkwritecsvdata.html)
Does ThingSpeak library supports the capability to send bulk csv data, any guidance?
Thanks and looking forward for your positive reply
Maybe %lld instead of %d?
I would like to know the maximum amount of storage space in the Data Logger.
I have a data.
And, I want to substract the data using for.
But, I want to ignore the nan values and substract others.
For example, [1, 2, 3, NaN, 6, 9, 12, 14] ---- substract---> [1, 1, 3, 3, 2]
How can I do this?
Hi guys,
I'm very new to matlab, so this might a rookie mistake. However, it seems that I have messed up some important part with the plot function. The program does not give my any kind of error messages, but still does not plot anything. What can I have done wrong and how do I fix this?
Best regards
My code:
close all
for t = -2:0.1:3
if (t<0 || t>1)
xvalue = 0;
end
if (t<= 1 && t>= 0)
xvalue = exp(2*t+1);
end
yvalue = -1*(xvalue) + exp(1);
hold on
figure(1);
plot(t, yvalue);
hold off
end
grid on;
Help us please, we need to send email after measurement from sonde (GSM report) is under limit for three days.
"React" on the limit, is non for three days under limit., and time control is days or weeks runner.
I propose trigger on time control but what is the code?
????
% Read the recent data.
moistureData = thingSpeakRead(channelID,'NumDays',3,'Fields',1); {is that right, that I read last three days measurement (3000x)?}
% Check to make sure the data was read correctly from the channel.
if isempty(moistureData)
alertBody = ' No data read from plant. ';
else
%{need if
% moistureData is for three days under limit from sonde then send
% email}
span = max(moistureData) - min(moistureData);
dryValue = span;
% Get the most recent point in the array of moisture data.
lastValue = moistureData(end);
% Set the outgoing message
if (lastValue<=dryValue)
alertBody = ' I need water! ';
elseif (lastValue>dryValue)
alertBody = ' No water needed. ';
end
really thanks so much
is there any problem today? thanks
Hi
Sent data was 4.94
{"created_at":"2022-08-28T23:38:23-04:00","entry_id":1269,"field4":"4.94"}]}
Read data was 4.00
Code:
long PHTS = ThingSpeak.readLongField(counterChannelNumber, FieldNumber4, myCounterReadAPIKey);
int statusCode = ThingSpeak.getLastReadStatus();
if (statusCode == 200)
{
Serial.print("ThingSpeak pH: ");
Serial.println(PHTS);
}
How to display 4.94 (actual data) when reading the data.
Thanks
I want to allow private channels to be viewed only by my organisation. How do I do that?
