Results for
I receive and visualize data from my weather station. (This is my channel: https://thingspeak.com/channels/1700157).
I want to know and show the date of last time it rained.
How can i do it? The data are updated every 15 minutes.
How to send an audio signal to thingspeak to be accessed later via HTTP protocol? it's possible ? Do you have an example you can share?
You might have read the news that NASA successfully crashed a spacecraft into an asteroid to alter the asteroid’s course. But did you know the spacecraft’s autonomous guidance system was developed in MATLAB and C++? Check out our latest blog post to learn more details.
Let’s celebrate this scientific milestone by creating astronomy-themed entries in the Mini Hack contest. Be creative and leverage the existing submissions in File Exchange. We will award special prizes to the best entries.
Dear Community, I using the free/community edition and I would like to know how long my data will remain accessible/stored in ThingSpeak.
I'm planning to store data for many years. Before making this a reality, I would like to be sure I have selected the correct plaform.
Thanks a lot ;)
Hopefully you are aware that MATLAB is built into ThingSpeak. Right now, MathWorks is hosting two contentsthat can help you learn MATLAB and then improve your IoT project.
I just set a calendar reminder to do a Cody problem each day. I can't win a prize but I can still get a virtual badge if I get a streak going.
Just in one week, 200 amazing images were created in the Mini Hack contest and 20,000 solutions were submitted in the Cody contest. What an amazing week! Time to announce the winners.
MATLAB Mini Hack Winners - Week 1
Your awesome work made our judging VERY HARD! We came up with several categories for winning entries. Congratulations to the winners! Each of you won a MathWorks T-shirt:
- Pink_panther, entry: Let's Go Fruity: Strawberry, category: File Exchange
- Lateef Adewale Kareem, entry: Umbrella, category: File Exchange (nice use of your own File Exchange entry)
- Teodo, entry: Shock wave, category: creative
- Basil Imoberdorf, entry: Colorful Fibonacci Scatter Spiral, category: colorful
- Stefan Abendroth, entry: Seahorse, category: abstract
- Paul Villain, entry: 102 mod 500, category: intricate
Cody 10th Anniversary Winners - Week 1
- The top 3 players for solving most problems in week 1 are Mohammed, Stefan Abendroth, and Hans Bourgeois. Congratulations! Each of you won an Amazon gift card.
- You don’t need to be an expert or spend tons of time to win! As long as you participate, you have the opportunity to win MathWorks T-shirts. Week 1 lucky winners are Meredith Reid and KARUPPASAMYPANDIYAN M.
In Week 2, we’ve added more fun to the contests!
MATLAB Mini Hack 2022:
- Voting started. Cast your votes on your favorite images. Help us show the world the beauty of mathematics by sharing your work with your friends, classmates, or colleagues.
- Toolboxes unlocked. You are able to leverage the Image Processing Toolbox to generate even more interesting images. We will award the best entries leveraging the Image Processing Toolbox.
Cody 10th Anniversary:
- Week 2 special problem group published. Check out MATLAB Fundamentals - Plotting and Visualization. Will you be able to finish the group in week 2?
hello :
I'm success using http send/receive between 16 bits MCU and Thingspeak.com via wifi , lan (ESP32(wifi) and LAN module )
but recently I have a new device it's BC95-B8 NBIOT device from quectel which it can only use UDP mode.
I want to connect / send /receive data with Thingspeak.com . but can't find any knowledge explain how to
Please advise
Thanks
I am working on a LoRaWAN project. My setup consists of 100 or more end-devices talking to a network server through a single gateway (private). My problem now is this.
I want the end-devices to belong to one of four groups with each group having a fixed range of spreading factors that can be used. Eg group 1 can only use SF 12, group 2 can only use SF 7, and so on. When an end device sends a join request, the network server should know which group the end device belongs to so it can assign the correct transmission parameter.
How can I achieve this? How can I encode the group that each end device belongs to into the join request for the network server, using maybe the AppEui or DevEui or AppKey or something? Any ideas?
The contest development team has identified an issue when trying to link your new entries to submissions in the File Exchange. The issue has prevented some users from successfully linking their entries. We have a fix and will be deploying it today at 3pm EST.
Hello, I run a weather station that consists of several sensors. Sensor1 supplies external weather data, Sensor2 internal room data and Sensor3 particulate matter values.
Can I display the variables of all sensors in a "Weather Station" channel and display them in charts?
If so, how do I do that with ThingSpeak?
Many Thanks
Two fun community contests: MATLAB Mini Hack 2022 and Cody 10th Anniversary start today on Oct. 3rd!
Participants across all skill levels are welcome to join! Even if you have limited time, you still have opportunities to win as long as you participate.
Want to challenge yourself and win Amazon gift Cards and limited-edition Badges?
1. MATLAB Mini Hack 2022: Create your best entry (either a new or a remixed entry).
2. Cody 10th Anniversary: Solve your 1st Cody problem today!
If you have any questions about the contest rules or prizes, let us know by replying to this thread.
We hope you enjoy the contests, improve your MATLAB skills, and win prizes! Now, let the party begin!
Hi Fellow Users,
I am Muthuserpi From A begginer of Optics studio Please anyone help me how to add two diffeaction reflective grating and How to tilt and decenter in matlab simulation
Thanks And Regards
S.Muthuserpi
Just in case, I have my license of MATLAB. I just have this question and I didn't find any information. I wouldn't like to create another account, for this reason I prefer to ask here.
Hello Community,
For E vehicle application to control the speed and torque of PMSM motor I am implementing FOC algorithm. We know that to arrive at Speed set point we have speed control loop which is outer loop, Further PI CONTROLLER of speed loop will give reference for Iq current which regulates the current using current loop. My question is 1.How to arrive at Torque set point?
2. Is speed control using FOC is enough or we should implement Torque control algorithm also?
3. should we have speed mode and Torque mode selection in case of constant speed requirement during cruise mode and high torque requirement during uphill situation respectively
4. To arrive at Torque set point what is the relation or transfer function to tune PI controller for Torque loop?
Please give your valuable inputs and answers, thanks in advance
Two fun community contests: MATLAB Mini Hack 2022 and Cody 10th Anniversary will start on Oct 3rd, 2022. Are you ready for the challenges and big prizes?
How to Play
1. MATLAB Mini Hack 2022 contest:
Use up to 280 characters of MATLAB code to generate an interesting image. New in 2022 contest: You'll be allowed to use functions from File Exchange entries and/or certain MathWorks toolboxes in different weeks.
2. Cody 10th Anniversary contest:
Solve at least 1 Cody problem per day during the 4-week contest period. We will reward participants with the longest streak of days of problem-solving!
Tips to Win
1. MATLAB Mini Hack 2022: Spend time creating your best work (either a new or remixed entry).
2. Cody 10th Anniversary: Make sure you start on the 1st day (Oct 3rd). This is the key if you want to win one of the grand prizes (worth marking your calendar?)
3. Act now: No matter if you want to join either the Mini Hack, Cody, or both. Start planning your strategy today.
Good luck! We hope you are the winner.
I wanted to ask that can we send bulk data through ThingSpeak ESP32 library using:
POST /channels/266256/bulk_update.csv HTTP/1.1
Host: api.thingspeak.com
Content-Type: application/x-www-form-urlencoded
time_format: relative
I saw it on mathswork "Bulk-Write CSV Data" (link: https://www.mathworks.com/help/thingspeak/bulkwritecsvdata.html)
Does ThingSpeak library supports the capability to send bulk csv data, any guidance?
Thanks and looking forward for your positive reply
Maybe %lld instead of %d?
I would like to know the maximum amount of storage space in the Data Logger.
I have a data.
And, I want to substract the data using for.
But, I want to ignore the nan values and substract others.
For example, [1, 2, 3, NaN, 6, 9, 12, 14] ---- substract---> [1, 1, 3, 3, 2]
How can I do this?
Hi guys,
I'm very new to matlab, so this might a rookie mistake. However, it seems that I have messed up some important part with the plot function. The program does not give my any kind of error messages, but still does not plot anything. What can I have done wrong and how do I fix this?
Best regards
My code:
close all
for t = -2:0.1:3
if (t<0 || t>1)
xvalue = 0;
end
if (t<= 1 && t>= 0)
xvalue = exp(2*t+1);
end
yvalue = -1*(xvalue) + exp(1);
hold on
figure(1);
plot(t, yvalue);
hold off
end
grid on;
