Vd, which is dependent on the model outputs, is fed-back to the model inputs which would have caused an algebraic loop if the filters were not present. The continued presence of the algebraic loop indicates that the V Filter and I Filter implementation probably has an unintended direct-feed through at some point during the simulation.
The proposed model bypasses the faulty filters with correctly functioning filters which breaks the algebraic loop.
Gert Kruger (2021). PV array with algebraic loop broken (https://www.mathworks.com/matlabcentral/fileexchange/71682-pv-array-with-algebraic-loop-broken), MATLAB Central File Exchange. Retrieved .
Inspired by: Real time tunable filters
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!Create scripts with code, output, and formatted text in a single executable document.
Doenst work powergui on discrete
Please note the following issues:
- The model is tested to work at least up to 2016b, with the Powergui block set to continuous.
- A discrete solver setting results in a derivative error: "Derivative of state '1' in block 'PV_array_solved_algebraic_loop_bus/PV Array/Vd Filter/ ' at time 0.0001 is not finite."
- It also does not initialize correctly when calling a Simulink model from a Matlab script. A workaround for this is to open the model and initialize it by running it at least once using the Simulink interface. Whilst still open the model can be called from a Matlab script.
It gives several errors. Sadly it doesnt work.
can you please have a look here
https://www.mathworks.com/matlabcentral/answers/513187-how-can-i-overcome-on-algebraic-loop-in-simulink?s_tid=prof_contriblnk
I have a same problem
it does not work with powergui block with discrete mode
not working
how to solve this error :Derivative of state '1' in block 'PV_array_solved_algebraic_loop_bus/PV Array/Vd Filter/ ' at time 0.0001 is not finite. The simulation will be stopped. There may be a singularity in the solution. If not, try reducing the step size (either by reducing the fixed step size or by tightening the error tolerances)
The motivation for this contribution originated from this post: https://www.mathworks.com/matlabcentral/answers/267687-why-pv-panels-gives-algebraic-loop-errors#answer_377065