Answered
How to shift a filter into higher frequency band?
The following link may be helpful to you <https://www.mathworks.com/help/dsp/examples/complex-bandpass-filter-design.html> ...

8 years ago | 1

| accepted

Answered
rotate elements in phase.ConformalArray
Phased Array System Toolbox currently does not have a parameter for this. Thanks for the question and I'll take note for the req...

8 years ago | 0

| accepted

Answered
Hi, How to plot the output signal from "Narrowband Transmit Array" block?
What information are you trying to plot? The output of transmit array block are signals in time domain, the directional informat...

8 years ago | 0

Answered
How to include element response in collectPlaneWave
I'm not an expert on CBSA, but steering vector computation does seem to account for the element response. When I ran your exampl...

8 years ago | 0

Answered
using antenna element designed from Antenna Toolbox in Phased Array Toolbox
You can just do something like ant = dipole; antarray = phased.ULA('Element',ant); HTH

8 years ago | 0

| accepted

Answered
Uniform Circular Array - Consist of 4 Half wave Dipole Antenna
Could you elaborate what is wrong with the result? The code runs without any issue so I'm not sure what issue you ran into. Note...

8 years ago | 0

Answered
View helix elements the viewArray
This currently not supported in Phased Array System Toolbox, We'll look into if this can be added in the future. Thanks.

8 years ago | 0

| accepted

Answered
How to access 'TextBox' in viewArray figure
Once you run |viewArray|, you can do findall(gcf,'Type','TextBox') It should return the all text boxes in the figure and...

8 years ago | 0

| accepted

Answered
Where to find the phased.URA steering vector equation
You can find the general equation here at <http://www.antenna-theory.com/arrays/arrayfactor.php> There is a one to one map...

8 years ago | 0

| accepted

Answered
Move phased.conformalArray phase reference center
For a conformal array, you define the position of each element in an [x;y;z] format, then there is an implicit origin for these ...

8 years ago | 0

| accepted

Answered
how to use sprintf with fullfile
Might be because sprintf('%d%02d.txt',i) You specified two formats but only one input. Maybe one of them is not needed?...

8 years ago | 1

| accepted

Answered
Assigning multiple variables vectors from a cell array
I would just do the following and then access them using 3rd indices reshape(cell2mat(cellArray),[size(cellArray{1}) length...

8 years ago | 0

| accepted

Answered
How to build the following vectors
Not sure I understand the rule for the first one, but here is my guess [-2:2, 5:5:35] and for the second one 4.5:-0...

8 years ago | 0

Answered
Help needed plotting a graph
You need to use ./, like y=sin(x).^2./x.^2 HTH

8 years ago | 0

| accepted

Answered
x,y,z plot and temperature
Is it something like this? x = rand(100,1); y = rand(100,1); z = rand(100,1); t = rand(100,3); scatter3(x,y,z,2...

8 years ago | 1

| accepted

Answered
what is the difference between hold and plot of two curves in the same figure ?
If that's all you need, for the practical purpose, there isn't much difference. However, the internal settings in the two figure...

8 years ago | 0

| accepted

Answered
Repeating a row vector in MATLAB until it reaches a specified length.
Here is one way to do it k_new = k(mod(0:length(j)-1,length(k))+1) HTH

8 years ago | 0

| accepted

Answered
Documentation or code details of signal.internal.getToneFromPSD that was called in snr.m
It is in the internal package, as indicated by the name signal.internal.*. This means that the function is only intended for int...

8 years ago | 0

| accepted

Answered
Generate portion of circular array elements
You can do both. You can either compute the position and normal of these elements and put them in a ConformalArray, see the firs...

8 years ago | 0

| accepted

Answered
Why do I get the error "Too many input arguments"
It should just be x0=filter(LPF0,x); the coefficients is already in LPF0. HTH

8 years ago | 0

Answered
how to turn off the legend in Phased array Pattern
Once you get the plot, you can just do legend off HTH

8 years ago | 0

| accepted

Answered
how to calculate the indices's distance of a vector using the data of a matrix?
Not sure if I missed anything but looks to me this can be done by sum(d(sub2ind(size(d),x(1:end-1),x(2:end)))) HTH

8 years ago | 0

Answered
can some help me out in Extended Kalman Filter?
Could you elaborate what you mean by adjusting the error? Depending on what kind of things you are trying to track and the track...

8 years ago | 0

| accepted

Answered
Why do I get an error on fdesign.highpass
If you are using R2010, I believe the licence you need is Filter Design Toolbox.

8 years ago | 1

Answered
how to increase phased array default far field distance
The far field assumption means that the directional pattern is only related to the angle, not the distance. The distance simply ...

8 years ago | 0

Answered
move xyz coordinate to (0,0,0) of the array in viewArray
There is no supported API for this. But once you get the figure, you can always plot the axes using regular MATLAB

8 years ago | 0

| accepted

Answered
plot antenna 3D pattern in subplot
Could you elaborate more regarding what went wrong? I can do the following in my MATLAB figure; subplot(2,2,1); patte...

8 years ago | 0

| accepted

Answered
Which toolboxes I need to simulate an End-to-End wireless system ?
WINNER II model is available at the following URL <https://www.mathworks.com/matlabcentral/fileexchange/59690-winner-ii-chann...

8 years ago | 0

Answered
reshape structure fields to a new array
Here is a quick example if I understand your question correctly X = struct('coord',{[1 2 3 3 2 1],[2 3 4]}) xcoord = [X....

8 years ago | 1

| accepted

Answered
unable to calculate autocorrelation with a for loop by using xcorr
Looks like it should be rmm = rmm(lags>=0) HTH

8 years ago | 0

| accepted