Answered
musyn hangs on DG-step
Hello Lucas, It seems you're encountering an issue where “musyn” hangs during the DG-step. To address this, you can tr...

1 year ago | 0

Answered
How to add kalman filter to the Lidar odometry and mapping slam present in the mathworks document?
Hi SAYANDIP, To integrate an Extended Kalman Filter (EKF) with your Lidar Odometry and Mapping (LOAM) SLAM system, fol...

1 year ago | 0

Answered
Need help for Instrument Control Toolbox with PicoScope 5000a
Hi hsnal, To acquire data in floating-point format from your “PicoScope 5243D” using MATLAB's Instrument Control Toolb...

1 year ago | 0

Answered
ND Convolution on a mesh
Hi Ifechi, To perform a 4D convolution of your node values with another similarly structured set of values without rea...

1 year ago | 0

Answered
M3 DC motor does not work
Hello Francesco, To address the freezing of your Simulink model at T=0.000s when assigning a constant value of 0 to the “M3 D...

1 year ago | 0

Answered
Transmit and Receive a Tone Using Xilinx RFSoC Device Failed
Hi Kefayet, The error indicates that the output port of “soc_rfsoc_datacapture_sw?IODataSource_Stream” is blocked, caus...

1 year ago | 0

Answered
5G NR MIB Recovery Using Xilinx RFSoC Device: Segmentation Fault
Hi Danna, A segmentation fault error typically indicates an attempt to access a restricted memory location. Since you'...

1 year ago | 0

| accepted

Answered
graph for FTCS shown only one point
Hi Nur, By carefully observing the code, it appears that the calculation of indices and plotting logic is correct. I...

1 year ago | 0

Answered
can you give the code for spline based waypoint navigation for drones or any uavs
Hi Bhagya, I understand that you want the spline to follow the trajectory of a polygon and pass around the waypoints. The code ...

1 year ago | 0

Answered
How to instance datacapture module into my HDL Code?
Hello Dongyun, As per my understanding, the issue you’re facing is with the top-level module, it seems like you’ve followed th...

1 year ago | 0

Answered
Messy Constellation from the ZCU111 MVDR Beamforming example
Hello Yang, As per my understanding, the issue you’re facing is with the IQ samples distribution with respect to the ideal con...

1 year ago | 0

Answered
Not able to run software template model for logistics.
Hello Vedansh, I understand that you’re facing issues with the “OFDM transmitter receiver model” example on the “ZC706” evalua...

1 year ago | 0

Answered
What is the cause of the error using privimporthdl when converting verilog to simulink?
Hi Panagiotis, I understand that you’re facing an issue while converting the Verilog design to Simulink model, the error you a...

1 year ago | 0

Answered
how to convert second order ODE to first in the below FDTD problem
Hi Yogesh, 1) To convert a second-order ODE to a first-order system, introduce a new variable for the derivative of the ...

1 year ago | 0

Answered
error in neural ODE simulation
Hi Muhammad, Based on the code you provided, it seems that you are getting a complex “dlarray” when you run the neural O...

1 year ago | 0

| accepted

Answered
Build DEE superposition graphs
Hi Mariana, The graphs may appear small due to the default figure size or the “subplot” configuration. To make the gra...

1 year ago | 0

Answered
Is it possible to Integrate Simulink/Matlab (2023b) with JADE via MACSimJX?
Hi Chaitanya, Yes, it is possible to integrate Simulink/MATLAB (2023b) with JADE via “MACSimJX”. “MACSimJX” is a tool th...

1 year ago | 0

Answered
PDE solver I made for the laplace equation fails when I insert a poisson equation
Hi Matan, To address the issue with poison equation solver you can try the following: Ensure Proper Source Term Int...

1 year ago | 0

Answered
C'è un tool di matlab che converte le immagini CT-scan in immagini US?
Hi Davide, There is no direct tool in MATLAB that converts CT images to ultrasound images due to the fundamental di...

1 year ago | 0

| accepted

Answered
decaying clip factor or entropy loss weight for PPO
Hi Sourabh, For implementing decaying clip factor or entropy loss weight in PPO using MATLAB. I would suggest you u...

1 year ago | 0

Answered
Toolkit Matlab Epanet 2.2
Hi Alfonso, I understand that you're encountering an error while using the “epanet” function. It is very lik...

1 year ago | 0

Answered
Is it possible to import a catia v5 Model /Assembly to simmechanics? And if yes, how it works? (.catproduct file absolutely)
Hi Gédéon, I understand that you want to know about the possibility of importing a CATIA V5 model or assembly (specifically a "...

1 year ago | 0

Answered
How to add s-parameters from two patches to that of the balun
Hi Vignesh, I understand that you're looking to cascade the S-parameters of two patches, which are in parallel, with the S-para...

1 year ago | 0

Answered
How can I use VITIS firmware for the example - Prototype FPGA Design on Hardware with Live Data by Using MATLAB Commands
Hi BUMHEE, I understand that you're trying to use Vitis firmware to control the hardware, what is the issue that you're facing ...

1 year ago | 0

Answered
Differences between SimScape model and Sympy model
Hi Ondrej, I understand the discrepancies you're facing with the 3D pendulum simulations in Simscape and Sympy. To resolve this...

1 year ago | 0

Answered
Narrowband Receive Array of phased array system toolbox has error when when using HDL coder
Dear Zuyuan, I understand the issue that you encountered with the "Narrowband Receive Array" block it is due to its ...

1 year ago | 1

Answered
The difference between performing the fft2 and the convolution
Hi Chen, I understand the discrepancies you faced between the results obtained from “fft2” and convolution methods to ...

1 year ago | 0

Answered
Frame Acquisition with Thorcam
Hi Sebastian, I understand that you are looking for a solution to save every frame visualized from a ThorCam (scientif...

1 year ago | 0

Answered
How to integrate trained neural network in the app (I have referred to older posts but still not succeed).
Hi Nurliana, I understand that you’re trying to integrate the trained neural network in the app designer. It seems tha...

1 year ago | 0

Answered
Infant EGI net is 124 not 128, need template
Hi Sabrina, I understand that you’re trying to use the 128-electrode template for actual 124 electrodes by deleting ...

1 year ago | 0