Dr. Houman Zarrinkoub, MathWorks
In this webinar, you will learn how to use MATLAB to simulate your wireless systems (LTE, WLAN, 5G etc.) and then connect your designs to a range of RF instruments and Software-Defined Radio (SDR) devices. We showcase how you can verify your designs in MATLAB by using live radio signals through waveform generation and over-the-air testing.
First, You will learn how to perform end-to-end simulation of LTE/WLAN standards and some 5G standard candidates. You will explore system performance by changing physical layer parameters including bandwidth, MIMO modes, modulation and coding scheme.
Finally, while transmitting and receiving live audio and video signals over the air, you will learn about the entire process from waveform generation, configuring signal transmission and acquisition parameters, retrieving IQ data into MATLAB and finally measurement and analysis on the received data in MATLAB and Simulink.
Recorded: 9 Feb 2016
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .Select web site
You can also select a web site from the following list:
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.