Generate optimization report
Generate HTML optimization report
Model Configuration Pane: Report
Description
Enable or disable generation of an HTML optimization report. The report contains information about the results of clock-rate pipelining, distributed pipelining, streaming, sharing, delay balancing, and adaptive pipelining optimizations that are implemented in the generated code. The report includes hyperlinks back to referenced blocks, subsystems, or validation models. If you have floating-point data types in your model, you can generate HDL code with native floating point support or map your design to native floating-point libraries and Intel® or Xilinx® FPGA floating-point libraries. When you map to FPGA floating-point libraries, the optimization report displays a target code generation section that displays the target device summary and a link to the generated model.
Settings
On
(default) | Off
On
Create and display an HTML optimization report. To generate the report, after you enable this setting, click the Generate button. The code generation report contains a summary section and a code interface report along with the optimization report.
Off
Do not create an HTML optimization report.
Tips
To set this property, use the functions hdlset_param
or makehdl
. To view the property value, use
the function hdlget_param
.
For example, you can generate an optimization report when
generating HDL code for the symmetric_fir
subsystem inside the sfir_fixed
model using
either of these methods.
Pass in the
OptimizationReport
parameter as an argument tomakehdl
.makehdl('sfir_fixed/symmetric_fir','OptimizationReport','on')
Enable the
OptimizationReport
parameter usinghdlset_param
and then usemakehdl
.hdlset_param('sfir_fixed','OptimizationReport','on') makehdl('sfir_fixed/symmetric_fir')
Recommended Settings
No recommendations.
Programmatic Use
Parameter:
OptimizationReport |
Type: Character vector |
Value: 'on' | 'off' |
Default: 'off' |