Simscape Faults Interface
The Simscape faults interface is convenient for working with single blocks as well as arrays of elements where you can apply a fault. You can add and configure the faults for each block in your model from a unified location, and you can turn fault simulation off to return your model to simulating baseline results. The Simscape fault functions help to add and analyze model faults.
Functions
simscape.addFaultsToBlock | Add faults to blocks (Since R2023b) |
simscape.getFaultableElementsInBlock | Return faultable block subelements (Since R2023b) |
simscape.findFaultableBlocks | Find blocks that support fault modeling (Since R2023b) |
Topics
- Introduction to Simscape Faults
Using the fault interface, creating faults, and triggering faults.
- Blocks that Support Fault Modeling
Information on blocks that support faults.
- Copying Faults
Duplicate blocks that have faults to copy faults in your models. (Since R2025a)
- Manually Trigger Faults in Models
Configure faults to be injected with manual control. (Since R2024b)
- Analyze a DC Armature Winding Fault
Add faults to a model using the faults interface.
