Anybody please share the matlab code for feeding two different waveform to two different array elements. Thanks.

Signal Processing

[John D'Errico]

What does this mean?

An array element is just a scalar value. What do you mean by feeding a wave form to a number?

Answer 1

[Amith]

As per my understanding you wanted to know how to feed two different waveforms as two different elements of an array .So here is an example on how to do that

    % Define parameters
    f1 = 1e3;  % Frequency of the first waveform
    f2 = 2e3;  % Frequency of the second waveform
    t = linspace(0,1,100)  % Time vector
    
    % Create the two waveforms
    waveform1 = sin(2*pi*f1*t);
    waveform2 = cos(2*pi*f2*t);
    
    % Create the array with two elements
    array = zeros(2, length(t));
    
    % Assign the waveforms to the array elements
    array(1, :) = waveform1;
    array(2, :) = waveform2;
    
    % Plot the waveforms
    subplot(2,1,1)
    plot(t, waveform1)
    xlabel('Time (s)')
    ylabel('Amplitude')
    title('Waveform 1')
    subplot(2,1,2)
    plot(t, waveform2)
    xlabel('Time (s)')
    ylabel('Amplitude')
    title('Waveform 2')

This code creates two waveforms with frequencies of 1 kHz and 2 kHz, and then assigns them to the first and second element of an array, respectively. The code then plots the two waveforms separately for visualization.

You can modify the code to create and assign different waveforms to the array elements as needed.

[Ananya]

Yes... This is what I mean to say. Thanks a lot.