Clear Filters
Clear Filters

How do I get this code to work properly?

3 views (last 30 days)
乐
on 13 Jun 2024
Commented: on 13 Jun 2024
main()
Warning: Error updating Text.

String scalar or character vector must have valid interpreter syntax:
\a_E
function main
% 输入已知数据
clear;
i1=0.1;
i3=0.59;
i4=0.159;
i6=0.36;
i61=0.578;
omega1=0.87;
alpha=0;
hd=pi/180;
du=180/pi;
%调用子函数,six_bar返回牛头刨床的位移,角速度,角加速度
for n1 = 1:459
theta1(n1)=-2*pi+5.8119+(n1-1)*hd;
ii=[i1,i3,i4,i6,i61];
[theta,omega,alpha]=six_bar(theta1(n1),omega1,ii);
s3(n1)=theta(1);
theta3(n1)=theta(2);
theta4(n1)=theta(3);
sE(n1)=theta(4);
v2(n1)=omega(1);
omega3(n1)=omega(2);
omega4(n1)=omega(3);
vE(n1)=omega(4);
a2(n1)=alpha(1);
alpha3(n1)=alpha(2);
alpha4(n1)=alpha(3);
aE(n1)=alpha(4);
end
%3.位移,角速度,角加速度和牛头刨床图形输出
figure(1);
n1=1:459;
t=(n1-1)*2*pi/360;
subplot(2,2,1);%绘角位移及位移线图
plot(t,theta3*du,'r-.'); %'r-.'表示线条是红色的,并且线型是点画线
grid on;
hold on;
title('角位移及位移线图')
axis auto;
[haxes,~,~]=plotyy(t,theta4*du,t,sE); %
grid on;
hold on;
xlabel('时间/s');
axes(haxes(1));%haxes(1)表示左边的坐标轴的句柄,这行代码表示下面的代码是在左边的坐标轴上作图,修改
ylabel('角位移/\circ');
axes(haxes(2));
ylabel('位移/m');
hold on;
grid on;
text(1.15,-0.65,'\theta_3');
text(3.4,0.27,'\theta_4');
text(2.25,-0.15,'\s_E');
subplot(2,2,2); %绘角速度及速度线图
plot(t,omega3,'r-.'); %'r-.'表示线条是红色的,并且线型是点画线
grid on;
hold on;
title('角速度及速度线图')
axis auto;
[haxes,~,~]=plotyy(t,omega4,t,vE); %
grid on;
hold on;
xlabel('时间/s');
axes(haxes(1));%haxes(1)表示左边的坐标轴的句柄,这行代码表示下面的代码是在左边的坐标轴上作图,修改
ylabel('角速度/rad\cdots∧{-1}');
axes(haxes(2));
ylabel('速度/m\cdots∧{-1}');
hold on;
grid on;
text(3.1,0.35,'\omega_3');
text(2.1,0.1,'\omega_4');
text(5.5,0.45,'\v_E');
subplot(2,2,3); %绘角加速度及加速度线图
plot(t,alpha3,'r-.'); %'r-.'表示线条是红色的,并且线型是点画线
grid on;
hold on;
title('角加速度及加速度线图')
axis auto;
[haxes,~,~]=plotyy(t,alpha4,t,aE); %
grid on;
hold on;
xlabel('时间/s');
axes(haxes(1));%haxes(1)表示左边的坐标轴的句柄,这行代码表示下面的代码是在左边的坐标轴上作图,修改
ylabel('角加速度/rad\cdots∧{-2}');
axes(haxes(2));
ylabel('加速度/m\cdots∧{-2}');
hold on;
grid on;
text(1.5,0.3,'\alpha_3');
text(3.5,0.51,'\alpha_4');
text(1.5,-0.11,'\a_E');
subplot(2,2,4); %牛头刨床机构
n1=20;
x(1)=0;y(1)=0;
x(2)=(s3(n1)*1000-50)*cos(theta3(n1));
y(2)=(s3(n1)*1000-50)*sin(theta3(n1));
x(3)=0;y(3)=i6*1000;
x(4)=i1*1000*cos(theta1(n1));
y(4)=s3(n1)*1000*sin(theta3(n1));
x(5)=(s3(n1)*1000+50)*cos(theta3(n1));
y(5)=(s3(n1)*1000+50)*sin(theta3(n1));
x(6)=i3*1000*cos(theta3(n1));
y(6)=i3*1000*sin(theta3(n1));
x(7)=i3*1000*cos(theta3(n1))+i4*1000*cos(theta4(n1));
y(7)=i3*1000*sin(theta3(n1))+i4*1000*sin(theta4(n1));
x(8)=i3*1000*cos(theta3(n1))+i4*1000*cos(theta4(n1))-900;
y(8)=i61*1000;
x(9)=i3*1000*cos(theta3(n1))+i4*1000*cos(theta4(n1))+600;
y(9)=i61*1000;
x(10)=(s3(n1)*1000-50)*cos(theta3(n1));
y(10)=(s3(n1)*1000-50)*sin(theta3(n1));
x(11)=x(10)+25*cos(pi/2-theta3(n1));
y(11)=y(10)-25*sin(pi/2-theta3(n1));
x(12)=x(11)+100*cos(theta3(n1));
y(12)=y(11)+100*sin(theta3(n1));
x(13)=x(12)-50*cos(pi/2-theta3(n1));
y(13)=y(12)+50*sin(pi/2-theta3(n1));
x(14)=x(10)-25*cos(pi/2-theta3(n1));
y(14)=y(10)+25*sin(pi/2-theta3(n1));
x(15)=x(10);
y(15)=y(10);
x(16)=0;
y(16)=0;
x(17)=0;
y(17)=i6*1000;
k=1:2;
plot(x(k),y(k));
hold on;
k=3:4;
plot(x(k),y(k));
hold on;
k=5:9;
plot(x(k),y(k));
hold on;
k=10:15;
plot(x(k),y(k));
hold on;
k=16:17;
plot(x(k),y(k));
hold on;
grid on;
axis ([-500 600 0 650]);
title('牛头刨床');
grid on;
xlabel('mm');
ylabel('mm');
plot(x(1),y(1),'o');
plot(x(3),y(3),'o');
plot(x(4),y(4),'o');
plot(x(6),y(6),'o');
plot(x(7),y(7),'o');
hold on;
grid on;
xlabel('mm');
ylabel('mm');
axis([-400 600 0 650]);
end
function [theta, omega, alpha]=six_bar(theta1,omega1,ii)
i1=ii(1);
i3=ii(2);
i4=ii(3);
i6=ii(4);
i61=ii(5);
%1.计算角位移和线位移
s3 =sqrt((i1*cos(theta1))*(i1*cos(theta1))+(i6+i1*sin(theta1))*(i6+i1*sin(theta1)));
%s3表示滑块2相对于CD杆的位移
theta3 =acos((i1*cos(theta1 ))/s3 );
%theta3表示杆3转过角度
theta4 =pi-asin((i61-i3*sin(theta3 ))/i4);
%theta4表示杆4转过角度
sE =i3*cos(theta3 )+i4*cos(theta4 );
%sE表示杆5的位移
theta(1)=s3;
theta(2)=theta3;
theta(3)=theta4;
theta(4)=sE;
%2.计算角速度和线速度
A=[sin(theta3 ),s3 *cos(theta3 ),0,0;
-cos(theta3 ),s3 *sin(theta3 ),0,0;
0,i3*sin(theta3 ),i4*sin(theta4 ),1;
0,i3*cos(theta3 ),i4*cos(theta4 ),0];
B=[i1*cos(theta1 );i1*sin(theta1 );0;0];
omega=A\(omega1*B);
v2 =omega(1);
%滑块2的速度  
omega3 =omega(2);
%构件3的角速度  
omega4 =omega(3);
%构件4的角速度
vE =omega(4);
%构件5的速度
%3.计算角加速度和加速度  
A=[sin(theta3 ),s3 *cos(theta3 ),0,0;
%从动件位置参数矩阵
cos(theta3 ),-s3 *sin(theta3 ),0,0;
0,i3*sin(theta3 ),i4*sin(theta4 ),1;
0,i3*cos(theta3 ),i4*cos(theta4 ),0];
At=[omega3 *cos(theta3 ),(v2 *cos(theta3 )-s3*omega3 *sin(theta3 )),0,0;
-omega3 *sin(theta3 ),(-v2 *sin(theta3 )-s3 *omega3 *cos(theta3 )),0,0;
0,i3*omega3 *cos(theta3 ),i4*omega4 *cos(theta4 ),0;
0,-i3*omega3 *sin(theta3 ),-i4*omega4 *sin(theta4 ),0];
Bt=[-i1*omega1*sin(theta1 );-i1*omega1*cos(theta1 );0;0];
alpha=A\(-At*omega+omega1*Bt);
%机构从动件的加速度列阵  
a2 =alpha(1);
%a2表示滑块2的加速度  
alpha3 =alpha(2);
%alpha3表示杆3的角加速度
alpha4 =alpha(3);
%alpha4表示杆4的角加速度
aE =alpha(4);
%构件5的加速度
end

Accepted Answer

Shivani
Shivani on 13 Jun 2024
Hello @乐,
There is one syntactical error and a few warnings in the code snippet shared:
  • There's an additional `end` keyword being used before the function six_bar. This was throwing a syntax error, preventing your code from executing.
  • The warning message `Warning: Error updating Text. String scalar or character vector must have valid interpreter syntax: \v_E`, is due to the use of an unrecognized escape sequence `\v` in the text string `'\v_E'`. MATLAB attempts to interpret `\v` as an escape character, but since `\v` is not a recognized escape sequence for a vertical tab or any other function, it results in an error. In MATLAB, when you want to display a backslash `\` in a string that is to be interpreted by the figure, you need to escape it by using a double backslash `\\`. However, in this case, it seems you want to display the variable name `v_E` as part of the figure annotation. To resolve this error, you should replace `'\v_E'` with `'v_E'` if your intention is simply to display the text "v_E".
I've made the above mentioned modifications in the code snippet below:
% 输入已知数据
clear;
i1=0.1;
i3=0.59;
i4=0.159;
i6=0.36;
i61=0.578;
omega1=0.87;
alpha=0;
hd=pi/180;
du=180/pi;
%调用子函数,six_bar返回牛头刨床的位移,角速度,角加速度
for n1 = 1:459
theta1(n1)=-2*pi+5.8119+(n1-1)*hd;
ii=[i1,i3,i4,i6,i61];
[theta,omega,alpha]=six_bar(theta1(n1),omega1,ii);
s3(n1)=theta(1);
theta3(n1)=theta(2);
theta4(n1)=theta(3);
sE(n1)=theta(4);
v2(n1)=omega(1);
omega3(n1)=omega(2);
omega4(n1)=omega(3);
vE(n1)=omega(4);
a2(n1)=alpha(1);
alpha3(n1)=alpha(2);
alpha4(n1)=alpha(3);
aE(n1)=alpha(4);
end
%3.位移,角速度,角加速度和牛头刨床图形输出
figure(1);
n1=1:459;
t=(n1-1)*2*pi/360;
subplot(2,2,1);%绘角位移及位移线图
plot(t,theta3*du,'r-.'); %'r-.'表示线条是红色的,并且线型是点画线
grid on;
hold on;
title('角位移及位移线图')
axis auto;
[haxes,~,~]=plotyy(t,theta4*du,t,sE); %
grid on;
hold on;
xlabel('时间/s');
axes(haxes(1));%haxes(1)表示左边的坐标轴的句柄,这行代码表示下面的代码是在左边的坐标轴上作图,修改
ylabel('角位移/\circ');
axes(haxes(2));
ylabel('位移/m');
hold on;
grid on;
text(1.15,-0.65,'\theta_3');
text(3.4,0.27,'\theta_4');
text(2.25,-0.15,'s_E');
subplot(2,2,2); %绘角速度及速度线图
plot(t,omega3,'r-.'); %'r-.'表示线条是红色的,并且线型是点画线
grid on;
hold on;
title('角速度及速度线图')
axis auto;
[haxes,~,~]=plotyy(t,omega4,t,vE); %
grid on;
hold on;
xlabel('时间/s');
axes(haxes(1));%haxes(1)表示左边的坐标轴的句柄,这行代码表示下面的代码是在左边的坐标轴上作图,修改
ylabel('角速度/rad\cdots∧{-1}');
axes(haxes(2));
ylabel('速度/m\cdots∧{-1}');
hold on;
grid on;
text(3.1,0.35,'\omega_3');
text(2.1,0.1,'\omega_4');
text(5.5,0.45,'v_E');
subplot(2,2,3); %绘角加速度及加速度线图
plot(t,alpha3,'r-.'); %'r-.'表示线条是红色的,并且线型是点画线
grid on;
hold on;
title('角加速度及加速度线图')
axis auto;
[haxes,~,~]=plotyy(t,alpha4,t,aE); %
grid on;
hold on;
xlabel('时间');
axes(haxes(1));%haxes(1)表示左边的坐标轴的句柄,这行代码表示下面的代码是在左边的坐标轴上作图,修改
ylabel('角加速度/rad\cdots∧{-2}');
axes(haxes(2));
ylabel('加速度/m\cdots∧{-2}');
hold on;
grid on;
text(1.5,0.3,'\alpha_3');
text(3.5,0.51,'\alpha_4');
text(1.5,-0.11,'a_E');
subplot(2,2,4); %牛头刨床机构
n1=20;
x(1)=0;y(1)=0;
x(2)=(s3(n1)*1000-50)*cos(theta3(n1));
y(2)=(s3(n1)*1000-50)*sin(theta3(n1));
x(3)=0;y(3)=i6*1000;
x(4)=i1*1000*cos(theta1(n1));
y(4)=s3(n1)*1000*sin(theta3(n1));
x(5)=(s3(n1)*1000+50)*cos(theta3(n1));
y(5)=(s3(n1)*1000+50)*sin(theta3(n1));
x(6)=i3*1000*cos(theta3(n1));
y(6)=i3*1000*sin(theta3(n1));
x(7)=i3*1000*cos(theta3(n1))+i4*1000*cos(theta4(n1));
y(7)=i3*1000*sin(theta3(n1))+i4*1000*sin(theta4(n1));
x(8)=i3*1000*cos(theta3(n1))+i4*1000*cos(theta4(n1))-900;
y(8)=i61*1000;
x(9)=i3*1000*cos(theta3(n1))+i4*1000*cos(theta4(n1))+600;
y(9)=i61*1000;
x(10)=(s3(n1)*1000-50)*cos(theta3(n1));
y(10)=(s3(n1)*1000-50)*sin(theta3(n1));
x(11)=x(10)+25*cos(pi/2-theta3(n1));
y(11)=y(10)-25*sin(pi/2-theta3(n1));
x(12)=x(11)+100*cos(theta3(n1));
y(12)=y(11)+100*sin(theta3(n1));
x(13)=x(12)-50*cos(pi/2-theta3(n1));
y(13)=y(12)+50*sin(pi/2-theta3(n1));
x(14)=x(10)-25*cos(pi/2-theta3(n1));
y(14)=y(10)+25*sin(pi/2-theta3(n1));
x(15)=x(10);
y(15)=y(10);
x(16)=0;
y(16)=0;
x(17)=0;
y(17)=i6*1000;
k=1:2;
plot(x(k),y(k));
hold on;
k=3:4;
plot(x(k),y(k));
hold on;
k=5:9;
plot(x(k),y(k));
hold on;
k=10:15;
plot(x(k),y(k));
hold on;
k=16:17;
plot(x(k),y(k));
hold on;
grid on;
axis ([-500 600 0 650]);
title('牛头刨床');
grid on;
xlabel('mm');
ylabel('mm');
plot(x(1),y(1),'o');
plot(x(3),y(3),'o');
plot(x(4),y(4),'o');
plot(x(6),y(6),'o');
plot(x(7),y(7),'o');
hold on;
grid on;
xlabel('mm');
ylabel('mm');
axis([-400 600 0 650]);
function [theta, omega, alpha]=six_bar(theta1,omega1,ii)
i1=ii(1);
i3=ii(2);
i4=ii(3);
i6=ii(4);
i61=ii(5);
%1.计算角位移和线位移
s3 =sqrt((i1*cos(theta1))*(i1*cos(theta1))+(i6+i1*sin(theta1))*(i6+i1*sin(theta1)));
%s3表示滑块2相对于CD杆的位移
theta3 =acos((i1*cos(theta1 ))/s3 );
%theta3表示杆3转过角度
theta4 =pi-asin((i61-i3*sin(theta3 ))/i4);
%theta4表示杆4转过角度
sE =i3*cos(theta3 )+i4*cos(theta4 );
%sE表示杆5的位移
theta(1)=s3;
theta(2)=theta3;
theta(3)=theta4;
theta(4)=sE;
%2.计算角速度和线速度
A=[sin(theta3 ),s3 *cos(theta3 ),0,0;
-cos(theta3 ),s3 *sin(theta3 ),0,0;
0,i3*sin(theta3 ),i4*sin(theta4 ),1;
0,i3*cos(theta3 ),i4*cos(theta4 ),0];
B=[i1*cos(theta1 );i1*sin(theta1 );0;0];
omega=A\(omega1*B);
v2 =omega(1);
%滑块2的速度  
omega3 =omega(2);
%构件3的角速度  
omega4 =omega(3);
%构件4的角速度
vE =omega(4);
%构件5的速度
%3.计算角加速度和加速度  
A=[sin(theta3 ),s3 *cos(theta3 ),0,0;
%从动件位置参数矩阵
cos(theta3 ),-s3 *sin(theta3 ),0,0;
0,i3*sin(theta3 ),i4*sin(theta4 ),1;
0,i3*cos(theta3 ),i4*cos(theta4 ),0];
At=[omega3 *cos(theta3 ),(v2 *cos(theta3 )-s3*omega3 *sin(theta3 )),0,0;
-omega3 *sin(theta3 ),(-v2 *sin(theta3 )-s3 *omega3 *cos(theta3 )),0,0;
0,i3*omega3 *cos(theta3 ),i4*omega4 *cos(theta4 ),0;
0,-i3*omega3 *sin(theta3 ),-i4*omega4 *sin(theta4 ),0];
Bt=[-i1*omega1*sin(theta1 );-i1*omega1*cos(theta1 );0;0];
alpha=A\(-At*omega+omega1*Bt);
%机构从动件的加速度列阵  
a2 =alpha(1);
%a2表示滑块2的加速度  
alpha3 =alpha(2);
%alpha3表示杆3的角加速度
alpha4 =alpha(3);
%alpha4表示杆4的角加速度
aE =alpha(4);
%构件5的加速度
end
  3 Comments
Steven Lord
Steven Lord on 13 Jun 2024
When you say "the runtime" have you created a standalone application using MATLAB Compiler and trying to run that application causes this error to occur, or are you trying to run this code in MATLAB on your desktop or MATLAB Online and that causes the error? I'm going to assume the latter for now; the former case would require a bit more information.
How is your code organized? The code in your main() function is in a file named main.m, I assume. Where is the code in your six_bar function located? Is it inside main.m (in which case it will only be accessible to functions defined inside main.m, you won't be able to call it directly from the MATLAB prompt or from a function defined in a different file), is it in a file named six_bar.m (in which case I would have expected this to work), or is it in a file with a different name?
In that last case, as stated in the Note in the Syntax for Function Definition section on this documentation page, "To avoid confusion, use the same name for both the function file and the first function within the file. MATLAB associates your program with the file name, not the function name. Script files cannot have the same name as a function in the file." [Emphasis added.]
If the function is defined in a file named seven_bar.m you would need to call it as seven_bar(... rather than six_bar(... but I would prefer to change the name of the file to match the name of the function.
乐
on 13 Jun 2024
Ok, it's been resolved, thanks for the answer.

Sign in to comment.

More Answers (0)

Categories

Find more on Data Import and Export in Help Center and File Exchange

Tags

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!