Hi/Low analog output to USB

21 views (last 30 days)
Naz
Naz on 20 Jan 2013
Commented: Walter Roberson on 4 Sep 2015
Hi,
I am trying to use MatLAB script as an on/off switch. In simple words, I wish to set a constant output of ~0V (low) or ~5V (high) at the USB port whenever I need to. How could I do this in a most simple and inexpensive way?
Thank you

Accepted Answer

Walter Roberson
Walter Roberson on 20 Jan 2013
This cannot be done directly with USB. USB is a shared serial bus, and only digital signals can be carried on it. If you were to use USB you would need to have a USB-interfaced device on the other end that decoded the serial commands to turn a switch on or off.
One important question for this purpose is what kind of rate of change do you need for this purpose? Another question is what precision you need in the timing. A third question is how much control you need over the pulse widths.
  13 Comments
Naz
Naz on 21 Jan 2013
Walter, Image Analyst: Thank you very much for such an extensive discussion. I greatly appreciate your time. This discussion will be usefull for many people. Regards, Naz

Sign in to comment.

More Answers (2)

Image Analyst
Image Analyst on 20 Jan 2013
For $89 or so you can get a USB device that you can read pins from. See http://www.mccdaq.com/usb-data-acquisition/USB-1024-Series.aspx
  5 Comments
Walter Roberson
Walter Roberson on 20 Jan 2013
It looks like their 1208LS might be suitable: USB, 2 analog outputs of 12 bit resolution, $129.
In terms of effort involved, possibly their device with built-in relays would be easier: USB, 8 SPDT relays, $329. I'm just thinking in terms of the time and effort to put together a relay, mount it on a small breadboard, test it, and so on. A relatively easy lab assignment for an EE student who was provided with parts and testing equipment, but a nuisance for people who do not have those things on-hand or have the relevant experience.
(I think I still remember how to solder, but it would probably take me at least 3/4 hour just to track down a local store that still bothered to stock the parts, now that the days are long gone where RadioShack carried parts like these...)

Sign in to comment.


Matyas Varga
Matyas Varga on 3 Sep 2015
  1 Comment
Walter Roberson
Walter Roberson on 4 Sep 2015

Price and availability of those appear to be questionable. It appears to me that they are no longer sold by NI, and auction sites list them between $US150 and $US300 plus about $US25 shipment from overseas.

Sign in to comment.

Categories

Find more on Periodic Waveform Generation in Help Center and File Exchange

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!