MATLAB Answers

Index Exceeds array bounds - error on line 67 (x_3). Why is this error happening? How do I fix?

1 view (last 30 days)
Sofia Diaz
Sofia Diaz on 16 Oct 2020
Edited: Sarvani Panguluri on 19 Oct 2020
% Square Wave problem
% INPUTS
T = 5; % sec, Period of forcing function
F_o = 30; % N, amplitude
k = 1000; % N/m, spring stiffness
omega_n = 3; %rad/s, natural frequency
zeta = 0.1; % damping factor
num_terms = 5; % Number of terms for Fourier series
num_periods = 2;
del_t = T/100; % Time increment for results
%% CALCULATIONS
time = 0:del_t:num_periods*T;
omega_T = (2*pi) / T;
% Exact Forcing Function
for i = 1:length(time)
if time(i) <= T/2
F(i) = -F_o;
elseif time(i) <= T
F(i) = F_o;
elseif time(i) <= (3*T)/2
F(i) = -F_o;
else
F(i) = F_o;
end
end
% Fourier approximation of Forcing Function
for n = 1:num_terms
aj = zeros(n,1); % numerical integration
bj = [-120/pi; 0; -40/pi; 0; -24/pi];
end
for i = 1:length(time)
F_1(i) = aj(1)*cos(1*omega_T*time(i)) + bj(1)*sin(1*omega_T*time(i)) ;
F_2(i) = aj(2)*cos(2*omega_T*time(i)) + bj(2)*sin(2*omega_T*time(i)) ;
F_3(i) = aj(3)*cos(3*omega_T*time(i)) + bj(3)*sin(3*omega_T*time(i)) ;
F_4(i) = aj(4)*cos(4*omega_T*time(i)) + bj(4)*sin(4*omega_T*time(i)) ;
F_5(i) = aj(5)*cos(5*omega_T*time(i)) + bj(5)*sin(5*omega_T*time(i)) ;
F_Fourier = F_1 + F_2 + F_3 + F_4 + F_5;
end
% Response
r = zeros(1,5);
tan = zeros(1,5);
alpha = zeros(1,5);
x_1 = zeros(1,201);
x_3 = zeros(1,201);
x_5 = zeros(1,201);
for s = 1:num_terms
r(s) = s.*(omega_T / omega_n);
tan(s) = (2*zeta.*r) / (1-(r.^2));
alpha(s) = atan(tan(s));
end
X_1 = (bj(1) / k) * (1 / sqrt( ((1 - (r(1)^2))^2) + ((2*zeta*(r(1)))^2)));
% X_2 = (bj(2) / k) * (1 / sqrt( ((1 - (r(2)^2))^2) + ((2*zeta*(r(2)))^2)));
X_3 = (bj(3) / k) * (1 / sqrt( ((1 - (r(3)^2))^2) + ((2*zeta*(r(3)))^2)));
% X_4 = (bj(4) / k) * (1 / sqrt( ((1 - (r(4)^2))^2) + ((2*zeta*(r(4)))^2)));
X_5 = (bj(5) / k) * (1 / sqrt( ((1 - (r(5)^2))^2) + ((2*zeta*(r(5)))^2)));
x_1 = X_1*(sin(((s(1)*omega_T*time) - alpha(s(1)))));
% x_2 = X_2*(sin(((s(2)*omega_T*time) - alpha(s(2)))));
x_3 = X_3*sin(((s(3)*omega_T*time) - alpha(s(3))));
% x_4 = X_4*sin(((s(4)*omega_T*time) - alpha(s(4))));
x_5 = X_5*sin(((s(5)*omega_T*time) - alpha(s(5))));
x_p = x_1 + x_3 + x_5;

Answers (1)

Sarvani Panguluri
Sarvani Panguluri on 19 Oct 2020
Edited: Sarvani Panguluri on 19 Oct 2020
Hi,
By reproducing your code,I have understood that the line causing the error is this
x_3 = X_3*sin(((s(3)*omega_T*time) - alpha(s(3))));
Reason for this is , variable s is of type 1*1 double .So s(3) is not defined.This is because the variable s is defined in 'for' loop as index.When defined as index it increments from initial value to final value and only final value is stored in it at the end of loop execution.
You can add the following line after for loop
for s = 1:num_terms
r(s) = s.*(omega_T / omega_n);
tan(s) = (2*zeta.*r) / (1-(r.^2));
alpha(s) = atan(tan(s));
end
s=1:num_terms;
Now s is 1*5 double of values [1,2,3,4,5].
Hope this helps!

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!