Does the USRP plug in work with UHD version 4.1.0.1?

The N320 firmware matches the host version. uhd_find_devices, uhd_usrp_probe, gnuradio/grc all working perfectly. Matlab detects the N320 just fine as well, with no software incompatability errors. However when I try to execute any scripts, or even findsdru I get (see below). Does anyone have a fix for this?:

>> findsdru

Checking radio connections...

---------- begin libuhd error output ----------

Device discovery error: resolve: Host not found (non-authoritative), try again later

---------- end libuhd error output ----------

---------- begin libuhd error output ----------

Device discovery error: resolve: Host not found (non-authoritative), try again later

---------- end libuhd error output ----------

Warning: An error occurred: Could not execute UHD driver command in 'createDriver_c': Could not create a UHD driver using IP addr

'192.168.10.2'. Attach a device at the specified address, correct the specified address to match an already attached device, or

continue to work in off-line mode.

Error from UHD: rpc::timeout: Timeout of 2000ms while calling RPC function 'get_num_xbars'.

> In coder.internal.warning (line 8)

In reportSDRuStatus (line 104)

In findsdru (line 205)

ans =

struct with fields:

Platform: 'N320/N321'

IPAddress: '192.168.10.2'

SerialNum: '31D2F0B'

Status: 'Unknown error'

lab@lab-ODROID-H2:/usr/local/lib/uhd/examples$ uhd_usrp_probe

[INFO] [UHD] linux; GNU C++ version 9.3.0; Boost_107100; UHD_4.1.0.HEAD-0-gf633b497

[INFO] [MPMD] Initializing 1 device(s) in parallel with args: mgmt_addr=192.168.10.2,type=n3xx,product=n320,serial=31D2F0B,fpga=XG,claimed=False,addr=192.168.10.2

[INFO] [MPM.PeriphManager] init() called with device args `fpga=XG,mgmt_addr=192.168.10.2,product=n320,clock_source=internal,time_source=internal'.

[INFO] [MPM.Rhodium-0] init() called with args `fpga=XG,mgmt_addr=192.168.10.2,product=n320,clock_source=internal,time_source=internal'

[INFO] [MPM.Rhodium-1] init() called with args `fpga=XG,mgmt_addr=192.168.10.2,product=n320,clock_source=internal,time_source=internal'

_____________________________________________________

/

| Device: N300-Series Device

| _____________________________________________________

| /

| | Mboard: ni-n3xx-31D2F0B

| | dboard_0_pid: 338

| | dboard_0_serial: 31C8E4C

| | dboard_1_pid: 338

| | dboard_1_serial: 31C8E53

| | eeprom_version: 3

| | fs_version: 20210713193932

| | mender_artifact: v4.1.0.1_n3xx

| | mpm_sw_version: 4.1.0.1-gf633b497

| | pid: 16962

| | product: n320

| | rev: 7

| | rpc_connection: remote

| | serial: 31D2F0B

| | type: n3xx

| | MPM Version: 4.0

| | FPGA Version: 8.0

| | FPGA git hash: d5c2750.clean

| |

| | Time sources: internal, external, gpsdo, sfp0

| | Clock sources: external, internal, gpsdo

| | Sensors: ref_locked, gps_locked, temp, fan, gps_gpgga, gps_sky, gps_time, gps_tpv

| _____________________________________________________

| /

| | RFNoC blocks on this device:

| |

| | * 0/DDC#0

| | * 0/DDC#1

| | * 0/DUC#0

| | * 0/DUC#1

| | * 0/Radio#0

| | * 0/Radio#1

| | * 0/Replay#0

| _____________________________________________________

| /

| | Static connections on this device:

| |

| | * 0/SEP#0:0==>0/DUC#0:0

| | * 0/DUC#0:0==>0/Radio#0:0

| | * 0/Radio#0:0==>0/DDC#0:0

| | * 0/DDC#0:0==>0/SEP#0:0

| | * 0/SEP#1:0==>0/DUC#1:0

| | * 0/DUC#1:0==>0/Radio#1:0

| | * 0/Radio#1:0==>0/DDC#1:0

| | * 0/DDC#1:0==>0/SEP#1:0

| | * 0/SEP#2:0==>0/Replay#0:0

| | * 0/Replay#0:0==>0/SEP#2:0

| | * 0/SEP#3:0==>0/Replay#0:1

| | * 0/Replay#0:1==>0/SEP#3:0

| _____________________________________________________

| /

| | TX Dboard: 0/Radio#0

| | _____________________________________________________

| | /

| | | TX Frontend: 0

| | | Name: Rhodium

| | | Antennas: TX/RX, CAL, TERM

| | | Freq range: 1.000 to 6000.000 MHz

| | | Gain range all: 0.0 to 60.0 step 1.0 dB

| | | Bandwidth range: 250000000.0 to 250000000.0 step 0.0 Hz

| | | Connection Type:

| | | Uses LO offset: No

| _____________________________________________________

| /

| | RX Dboard: 0/Radio#0

| | _____________________________________________________

| | /

| | | RX Frontend: 0

| | | Name: Rhodium

| | | Antennas: TX/RX, RX2, CAL, TERM

| | | Freq range: 1.000 to 6000.000 MHz

| | | Gain range all: 0.0 to 60.0 step 1.0 dB

| | | Bandwidth range: 250000000.0 to 250000000.0 step 0.0 Hz

| | | Connection Type:

| | | Uses LO offset: No

| _____________________________________________________

| /

| | TX Dboard: 0/Radio#1

| | _____________________________________________________

| | /

| | | TX Frontend: 0

| | | Name: Rhodium

| | | Antennas: TX/RX, CAL, TERM

| | | Freq range: 1.000 to 6000.000 MHz

| | | Gain range all: 0.0 to 60.0 step 1.0 dB

| | | Bandwidth range: 250000000.0 to 250000000.0 step 0.0 Hz

| | | Connection Type:

| | | Uses LO offset: No

| _____________________________________________________

| /

| | RX Dboard: 0/Radio#1

| | _____________________________________________________

| | /

| | | RX Frontend: 0

| | | Name: Rhodium

| | | Antennas: TX/RX, RX2, CAL, TERM

| | | Freq range: 1.000 to 6000.000 MHz

| | | Gain range all: 0.0 to 60.0 step 1.0 dB

| | | Bandwidth range: 250000000.0 to 250000000.0 step 0.0 Hz

| | | Connection Type:

| | | Uses LO offset: No

lab@lab-ODROID-H2:/usr/local/lib/uhd/examples$ uhd_find_devices

[INFO] [UHD] linux; GNU C++ version 9.3.0; Boost_107100; UHD_4.1.0.HEAD-0-gf633b497

--------------------------------------------------

-- UHD Device 0

--------------------------------------------------

Device Address:

serial: 31D2F0B

addr: 192.168.10.2

claimed: False

fpga: XG

mgmt_addr: 192.168.10.2

product: n320

type: n3xx