Suneesh

Last seen: 10 months ago

MathWorks

109 total contributions since 2011

Professional Interests: signal processing, real time systems, mobile communication

Contact

Suneesh's Badges

View details...

Solved

Select every other element of a vector
Write a function which returns every other element of the vector passed in. That is, it returns the all odd-numbered elements, s...

2 years ago

Answered
TCP/IP Connection with Smart Meter on xPC Target in Simulink Real Time 2016a and s-function
TCP specific socket functions (for example CONNECT) were not avaialble in R2016a. We have TCP blocks in 17a - try the pre-releas...

4 years ago | 0

Answered
xcp slave for simulation
Not aware of one in Simulink but there is always the simulator available at vector.com. See: <https://www.mathworks.com/matla...

4 years ago | 0

Answered
Using a DAQ card in a xPC target communication
Not supported. Supported D/A cards are listed here: http://www.mathworks.com/help/xpc/da.html

5 years ago | 0

Answered
When set up and configure xPC Target, why it has error messages: "Can not get interface ip address" "Batch file could not be creadted"
Sometimes happens due to the network not being "active". Try to turn on the target and when BIOS loads it should power up the ca...

5 years ago | 1

| accepted

Answered
Real time control based on communication with database
You could write a MATLAB function to perform the three steps and then use a MATLAB timer object to execute it as often as you ne...

6 years ago | 1

| accepted

Answered
Is my RTW toolbox correctly installed?
This is an installation problem for which MathWorks provides free support. Please contact Tech Support.

6 years ago | 0

| accepted

Answered
Using vehicle network toolbox blocks with Simulink Real-Time
Vehicle Network Toolbox blocks usually work by using the Windows drivers for the cards. These drivers are not present on the SLR...

6 years ago | 0

Answered
scanned malayalam handwritten text into an editable format
1. From an OCR perspective, I would start off with mapping the characters to the code for the individual characters. 2. Next...

6 years ago | 0

Answered
How can I rotate xPC target screen to portrait mode?
That feature is not available. Do contact technical support so that the team is aware that such a feature is being requested for...

6 years ago | 0

Answered
Why does my xPC Target simulation stops at 100 sec while i configure it 144000 sec
That sounds like a bug. Please contact technical support.

6 years ago | 0

Answered
How to get a real-time data in using udp/tcp with xpc target?
This example may have something that you are looking for: <http://www.mathworks.com/help/xpc/examples/target-to-host-transmis...

6 years ago | 0

Answered
Standalone Real-Time Application for XPC target
<http://www.mathworks.com/help/xpc/gs/removable-disk-boot-method.html>

6 years ago | 0

Answered
Windows Real-Time Target - Serious Lag
1. Are you using the Synchronization block and running the model in Normal mode? Perhaps you could try the external mode and see...

6 years ago | 0

Answered
Are there CAN-USB drivers for Simulink Real-Time?
CAN USB drivers are not supported. All supported hardware are listed at: <http://www.mathworks.com/products/simulink-real-tim...

6 years ago | 0

| accepted

Answered
How to display strings on xpc target (Simulink 2014)?
Scopes do not support strings since scopes display Simulink signal values which are always numeric. PRINTFs in S-Functions appea...

6 years ago | 0

Answered
Can I use each of the I8254x and I82559 chipsets for model-based ethernet communication in Simulink Real-Time, even if the network adapter is based on PCI Express (PCIe x4)?
Although there are hardware architectural differences between PCI and PCIe, they are software compatible. In theory, the target ...

6 years ago | 0

| accepted

Answered
Three-Phase Fault Parameter Values of Simulink Model in Real-Time Target
This is more of a question about the Three-Phase fault block rather than about Simulink Real-Time. The parameter does not appear...

6 years ago | 0

Answered
Issue with a DAQ model NI PCIe-6351 with Real-Time Windows Target
Real-time Windows Target is a different product from Simulink Real-Time. 1. Do you see your card in the hardware list for Si...

6 years ago | 0

Answered
Complete build in SLRT
<http://www.mathworks.com/matlabcentral/answers/100533-is-it-possible-to-have-a-rebuild-all-option-for-custom-code-in-my-model-i...

6 years ago | 0

Answered
Problem booting XPC Target using v5.2 (2012a)
Only other troubleshooting step I can think of is disabling the USB controller in BIOS. Some USB controllers may have an incompa...

6 years ago | 0

| accepted

Answered
Simulink Real-time CAN bus support
Only the blocks as indicated in the documentation are officially supported: <http://www.mathworks.com/help/xpc/dob-mode-can-m...

6 years ago | 0

| accepted

Answered
Need help for Host-Target EtherCAT connection in Simulink Real Time (2014a)
Simulink requires just the ENI configuration file. In order to generate the config file you need the Beckhoff configurator (or s...

6 years ago | 0

| accepted

Answered
Network Boot Problem - xPC - Help Needed
Perhaps the video card is not supported. Try: # Recreate the boot image with 'Target Scopes' Disabled. This boots the target ...

6 years ago | 0

| accepted

Answered
Simulink Real Time - xPC Problem
Follow the instructions in the message: To see a list of current users use the lmstat utility or contact your Licens...

6 years ago | 0

Answered
how to access serial port data in matlab?
# Check if the device is transmitting. A loop back test is a good way to start with. # Sometimes a termination character is req...

6 years ago | 0

Answered
PLL examples some don't work powerlib problem
'powerlib' is part of the SimPowerSystems product. You may be missing that product. Contact MathWorks Technical Support to obtai...

6 years ago | 1

| accepted

Answered
xPC Target & concurrent models - how to get TET?
Have you tried using the profiler? Here is an example for a concurrently executed model: <http://www.mathworks.com/help/xpc/e...

6 years ago | 0

Answered
Have you ever noticed an increasing delay while UDP protocol send/receive packets?
From the image of the model, you are using blocks from the product "Real-Time Windows target (RTWT)". I am not too familiar with...

6 years ago | 1

| accepted

Answered
xPC target and ARM Cortex
There isn't one for ARM architecture. xPC target (Now Simulink Real-Time) is currently supported only for PC compatible architec...

6 years ago | 0

| accepted