Why am I getting the error "Array indices must be positive integers or logical values"?

I want to compare the exponential of matrix "A" obtained by the summation formula and the one with the eigen values. However, I'm getting the following error when exponential is computed with the diagonalised form (E here). 

Array indices must be positive integers or logical values.

A = [1,2,1,3; 3,1,2,0; 2,2,1,4; 1,3,2,1];
[V,D] = eig(A);
exp_A = 0;
for k = 0:100
    exp_A = exp_A + (A^k)/factorial(k);
end
disp(exp_A);

  304.3054  340.7344  263.9243  320.0369
  275.4796  308.2690  238.7711  289.0775
  389.2552  436.7654  339.1998  410.7063
  309.9581  347.7556  269.7020  326.5840

E = V*(exp(D))\V;
disp(E);

   0.0008 + 0.0000i  -0.0001 - 0.0000i  -0.0001 + 0.0000i  -0.0007 - 0.0000i
  -0.0001 - 0.0000i  -0.8364 - 0.1567i   0.1039 + 0.0000i   0.8393 + 0.1795i
  -0.0001 + 0.0000i   0.1039 + 0.0000i  -0.8364 + 0.1567i   0.8393 - 0.1795i
  -0.0007 - 0.0000i   0.8393 + 0.1795i   0.8393 - 0.1795i  -0.7766 - 0.0000i

[madhan ravi]

to be frank I didnt get any error running your code

[Thamizhthenvalavan Gajendiran]

no such error occured

[Dawit Alemayehu]

No Error when I run your code; And this was the out put; >>

 A = [1,2,1,3; 3,1,2,0; 2,2,1,4; 1,3,2,1];
 [V,D] = eig(A);
 exp_A = 0;
 for k = 0:100
     exp_A = exp_A + (A^k)/factorial(k);
 end
 disp(exp_A);
 E = V*(exp(D))\V;
 disp(E); 

304.3054 340.7344 263.9243 320.0369 275.4796 308.2690 238.7711 289.0775 389.2552 436.7654 339.1998 410.7063 309.9581 347.7556 269.7020 326.5840

Columns 1 through 2

   0.0008 - 0.0000i  -0.0001 - 0.0000i
  -0.0001 - 0.0000i  -0.8364 - 0.1567i
  -0.0001 + 0.0000i   0.1039 + 0.0000i
  -0.0007 - 0.0000i   0.8393 + 0.1795i

Columns 3 through 4

-0.0001 + 0.0000i  -0.0007 + 0.0000i
 0.1039 - 0.0000i   0.8393 + 0.1795i
-0.8364 + 0.1567i   0.8393 - 0.1795i
 0.8393 - 0.1795i  -0.7766 + 0.0000i

>>

disp(exp_A) 

304.3054 340.7344 263.9243 320.0369 275.4796 308.2690 238.7711 289.0775 389.2552 436.7654 339.1998 410.7063 309.9581 347.7556 269.7020 326.5840 I suggest running on different machine. Good Luck!

[Sunita]

bar(scores)

[Walter Roberson]

@Sunita

You probably have a variable named bar

Answer 1

[Kelly Kearney]

MATLAB uses 1-based indexing, so the first element is accessed with index 1, not 0. This means array indices must be positive integers. For example, access the first element of a vector "A". 

A = [10, 9, 8, 7, 6]; Aval = A(1)  % This returns 10. Meanwhile, A(0) returns an error. 

MATLAB also accepts logical indexing, which can be useful when working with conditional statements. For example, say you want to know the values of "A" that is larger than 7. Use the > operator to return a logical array whose elements are logical 1 when an element in "A" is larger than 7; and logical 0 otherwise. 

ind = A > 7 

Now that you know the locations of the elements meeting the condition, you can access the individual values that are larger than 7 by using "ind" as the index array. 

Avals = A(ind) 

For more information, see Array Indexing. 

As others have mentioned, without providing the full code that caused the error, it is hard to pinpoint why this error occurs. For example, you can have a variable named "sum = 2" sitting in your workspace. So, when you try to call the built-in "sum" function to find the sum of array elements, such as "sum(0.1:0.1:1)", the existing variable is overshadowing it. The error occurs because MATLAB cannot extract the element with index 0.1, 0.2, and so on. To avoid this error, you should not use a variable name that conflicts with MATLAB built-in functions. 

[Yogesh Pai]

You were right. There was an old value stored in a variable 'exp'. Thanks!

[Henry Yanapa Limachi]

Cierto hay que borrar "clear all"

Answer 2

[Roya Kakar]

Please answer my quesion. I get the following error after running this line of code

sm =sum(table2array(X));

Array indices must be positive integers or logical values.

[Stephen23]

@Roya Kakar: you have defined a variable named sum. Clear it from the workspace.

[Roya Kakar]

It actually worked. Thank you so much

Answer 3

[henry espinoza]

Array indices must be positive integers or logical values.

Error in Tarea3_HE (line 15)

Xc1 = (-1 /(PRM(u)*(w)))*j

[Walter Roberson]

Your variable u contains zeros or negative values or fractions.

You might have thought that PRM is a function, but at that point in the code it is a variable.

Answer 4

[laura celis]

tengo este error

Array indices must be positive integers or logical values.

Error in recortedesenales (line 38)

z1= z(A:B);

[Walter Roberson]

Your variable A(1,1) is negative, or zero, or contains fractions, and B(1,1) is greater than A(1,1) .

B(1,1) is not necessarily an integer and is not necessarily an integer-value more than A(1,1). For example, 3:5.1 is a valid indexing vector because it expands to [3 4 5]

Answer 5

[Roshan Siwakoti]

a(i) =((delta_p2)/(2*tau(j)*(t_traj(j+1)-t_traj(j))))-((delta_p1)/(2*tau(j)*(t_traj(j)-t_traj(j-1))))

Array indices must be positive integers or logical values

[Image Analyst]

Since this is one of the most common FAQs, see the FAQ for a thorough discussion:

https://matlab.fandom.com/wiki/FAQ#.22Subscript_indices_must_either_be_real_positive_integers_or_logicals..22

[Kelly Kearney]

Possible guess... Is a(i) supposed to be a(j)? If you haven't otherwise set i to be an integer, it defaults to sqrt(-1), which cannot be used as an index. Same goes for j; check that it's an integer. Best practices in Matlab recommend avoiding i or j as indices for this very reason.

[Walter Roberson]

I predict that your j is 1 so j-1 is 0 which is not a valid index.

Answer 6

[Ferlyn]

% c. x(t) = 3*exp(-2*t)u(t)
subplot (4,2,3)
y = 3*exp(-2*t).*(u(t));
plot (t,y,'-g','Linewidth', 2);
axis ([-1 5 -1 5]);
grid on;
xlabel ('t in sec');
ylabel ('x(t)');
title ('plot of (c)');

Here's my code and it says "Array indices must be positive integers or logical values". What should I do to fix it? Thank you.

[Walter Roberson]

I predict that u is a vector and t is not positive integers.

It is common for u(t) to intend to refer to the unit step function applied to t -- but it is also common for u to be defined as a vector. For example you might have

u = t>=0;

and if you had that and then tried u(t) it would be an attempt to index the vector u at locations given by t, but t probably starts with 0.

Answer 7

[Nerea Espinosa Giralt]

Hola!

Tengo este error." Array indices must be positive integers or logical values."

Atenuacion=(k*R_001^alfa*u(p))*(R_001)^(0.38/Ls-0.25/(1+n(p/0.01)^(-0.36)*longitud^m)*Ls);

¿podriais ayudarme por favor?

Gracias,

Saludos

[Nerea Espinosa Giralt]

Este es mi código entero

close all;
clc;
clear all;


%Variables
frecuencia= 60e9; %GHz
longitud=36000e3; %Km
elevacion=70; %grados
R=100.0; %mm/h
landa = 1.066;
gamma = 0.214;

n= 0.03; %sería n=0 si l>5 km y f<25 GHz
p=0.05; %porcentaje de tiempo
R_001=0.01; % para un 1%, 0.1% y 0.01% de tiempo
k=4.56;
alfa= 1.03;
%Hr=4;  %0<Ø<36º
Hr=4-0.075*(elevacion-36); %Ø>36º
H0=20;

m=1+1.4*10^-4*frecuencia^1.76*log(longitud);

Ls= (Hr-H0)/sin(elevacion)+2*(Hr-H0)/8500^0.5+sin(elevacion);


u = 4*log(10)/R_001^(-landa*(R/R_001))^(gamma);

Atenuacion=(k*R_001^alfa*u(p))*(R_001)^(0.38/Ls-0.25/(1+n(p/0.01)^(-0.36)*longitud^m)*Ls);

[Image Analyst]

You have u(p) which is u(0.05). There is no 0.05'th element of a matrix. Only the 1st element, 2nd element, 3rd element, etc.

https://matlab.fandom.com/wiki/FAQ#%22Subscript_indices_must_either_be_real_positive_integers_or_logicals.%22

[Steven Lord]

The section of code with n(p/0.01) also looks like it might be missing a multiplication operator. If it isn't and you intended p/0.01 to give you an integer value you can use as an index into n, you may encounter difficulties due to floating point arithmetic. Even if that expression did happen to give an integer value (or you called round to force it to give an integer value) as written unless that integer value is 1 you're asking for an element of n that doesn't exist.

x = 1;
y = x(2) % There is no second element

Index exceeds the number of array elements. Index must not exceed 1.

Answer 8

[Fariha]

Hello, my code:

yoy(j,1)=100*(log(Real_Price(ii,1))-log(Real_Price(ii-4,1)));

every time I run it says '

Array indices must be positive integers or logical values.

'

can you help me understand my problem?

[DGM]

MATLAB sees that you're trying to index into an array. Array indices must be real positive (nonzero) integers (or logicals). So:

Is the index jj a real, positive integer?

Is the index ii a real, positive integer?

Is ii>4 so that ii-4 is always positive?

Is log() still interpreted as a function, or have you created a variable with the same name?

Answer 9

[Maximilian]

Hello, why am I getting the "Array indices must be positive integers or logical values." error for the code below. I cleared the workspace so that shouldn't be a problem.

Vi = 0;
Vf = 1;
R = 1000;
C = 10 * 10^-6;
t = linspace(0,0.1,1001);
r = R*C;
V(t) = Vi + (Vf-Vi).*(1 - (2.72 .^(-t/r)));
Plot(t,V(t))

[Stephen23]

You Index into V using t:

V(t) = ...

Are the values of t valid indices? (hint: no) Get rid of them:

Vi = 0;
Vf = 1;
R = 1000;
C = 10 * 10^-6;
t = linspace(0,0.1,1001);
r = R*C;
V = Vi + (Vf-Vi).*(1 - (2.72 .^(-t/r)));
plot(t,V)

[Walter Roberson]

It is common to get confused between a formula and an array

A line such as

V(t) = Vi + (Vf-Vi).*(1 - (2.72 .^(-t/r)));

is typically intended to be a formula -- the left and right t are intended to refer to values

MATLAB does support creating formulas with that syntax, but only using the Symbolic Toolbox, such as

syms t
V(t) = Vi + (Vf-Vi).*(1 - (2.72 .^(-t/r)));

MATLAB would then refer to V as a "symbolic function".

MATLAB main support for creating formulas is for numeric formulas (that do not typically involve the Symbolic Toolbox). Those use a different syntax called "anonymous functions" that would look like

V = @(t) Vi + (Vf-Vi).*(1 - (2.72 .^(-t/r)));

In both the case of the "symbolic function" and this "anonymous function", V would become an object describing calculations that would be done if you pass values to the object, such as

V(3.2)

In both the symbolic function and the anonymous function, the t would refer to some indefinite value of t to be given value later, and the symbolic or anonymous function describes how to calculate the output in that future time when you finally get passed a specific value in place of t

But if you are not working with symbolic functions or anonymous functions (or some Object Oriented classes) then () is either for passing parameters to a function, or else for indexing. In the original code

t = linspace(0,0.1,1001);
V(t) = Vi + (Vf-Vi).*(1 - (2.72 .^(-t/r)));

you are working with definite numeric values for t not with a symbolic variable, so the right hand side is calculating definite numeric values, and the left side V(t) would be considered indexing.

Almost any time you have definite numeric values for t, V(t) on the left side of an assignment would be interpreted as an attempt to index. (There are some potential exceptions for Object Oriented classes.)

Answer 10

[Lokesh]

Array indices must be positive integers or logical values.

Error in p3 (line 38)

f_triple_prime(i) = (f(i+1) - 3*f(i) + 3*f(i-1) - f(i-2)) / (deta^3);

[DGM]

Well, considering that you're the only one that knows what your code does, did you try reading the error and then lookign to see if the given indices are positive integers?

[Walter Roberson]

Hint: what happens when i = 1 or i = 2 ?

Answer 11

[Elián]

clear,
close all;
A=[1,9,1];
B=[2,4,7];
C=[10,-1,5];
paso=1;
retardo=0.01;
cont=1;
t=0:0.1:1;
x1=t*B(1)+(1-t)*A(1);
y1=t*B(2)+(1-t)*A(2);
z1=t*B(3)+(1-t)*A(3);
plot3(x1(1),y1(1),z1(1),'*r')
xlabel('eje x')
ylabel('eje y')
zlabel('eje z')
axis([-5 5 -5 5 -20 20])
title ('Trayectoria de una particula en el espacio (Grafica Elian Sayas)')
hold on
grid on
H=scatter3(x1(1),y1(1),z1(1),200, 'MarkerEdgeColor', 'k', 'LineWidth' ,3);
tiempo=['t=' ,num2str(t(1)), 's'];
Ht=text (A(1)+1, A(2)+1, A(3)+1, tiempo, 'Color', 'b', 'FontSize', 12);
for i= 2:paso:length(t)
    delete(H),
    delete(Ht),
    T=plot3([x1 (i-1) x1(1)], [y1(1-1) y1(i)], [z1(i-1) z1(i)], 'b', 'LineWidth',1.2);
    H=scatter3(x1(1) ,y1(i),z1(i),200, 'MarkerEdgeColor' , 'k', 'LineWidth',3);
    tiempo=['t=',num2str(t(i)),'s'];
    Ht=text(A(1)+1,A(1)+1,A(1)+1, tiempo, 'Color', 'b', 'FontSize',12);
    F(cont)=getframe(gcf);
    cont=cont+1;
    pause(retardo)
end
hold on
t2=1:0.1:2;
x2=(2-t2) *B(1)+(t2-1) *C(1) ; y2=(2-t2) *B(2)+(t2-1) *C(2);
z2= (2-t2) *B(3)+(t2-1)*C(3) ;
plot3(x2(1), y2(1), z2(1), '*y')
for i= 2: paso: length(t2)
    delete (H) , delete(Ht) ,
    T=plot3([x2(i-1) x2(i)],[y2(i-1) y2(1)],[z2(1-1) z2(i)],'b' ,'LineWidth',1.

Invalid expression. When calling a function or indexing a variable, use parentheses. Otherwise, check for mismatched delimiters.

    H=scatter3(x2(i),y2(i),z2(i),200,'MarkerEdgeColor','k','LineWidth' ,3);
    tiempo=['t2=',num2str(t2(i)),'s'];
    Ht=text(A(1)+1,A(1)+1,A(1)+1,tiempo,'Color','b','FontSize',12);
    F(cont)=getframe(gcf) ; cont=cont+1;
    pause(retardo)
end
hold on
t3=2:0.1:20;
x3=cos(t3-2)-1+C(1);
y3=sin(t3-2)+C(2);
z3=t3-2+C(3);
plot3(x3(1),y3(1),z3(1),'*m');
for i= 2: paso: length(t3)
    delete(H),
    delete(Ht),
    T=plot3([x3(i-1) x3(1)],[y3(1-1) y3(1)],[z3(i-1) z3(1)],'b', 'LineWidth',1.2);
end
video-Videowriter('ANIMACION_TRAYECTORIA', 'Uncompressed AVI');
open(video)
writeVideo(video,F)
close(video)

[Walter Roberson]

Your line

T=plot3([x2(i-1) x2(i)],[y2(i-1) y2(1)],[z2(1-1) z2(i)],'b' ,'LineWidth',1.

is missing a ")" at least. it was probably intended to be

T=plot3([x2(i-1) x2(i)],[y2(i-1) y2(1)],[z2(1-1) z2(i)],'b' ,'LineWidth',1.2);