Target Computer Setup
To run a real-time application on a target computer, first configure your target computer with the required I/O modules and Ethernet ports. Physically connect it to the development computer with a TCP/IP Ethernet link. Configure the Simulink Real-Time target settings with Simulink Real-Time Explorer or MATLAB language. Finally, build and download the real-time application to the target computer.
|Open Simulink Real-Time explorer and interact with target computers and real-time applications|
|Open the Simulink Real-Time System Log Viewer tab in the Simulink Real-Time Explorer to view the console log from the target computer|
|Open Simulink Real-Time task execution time (TET) monitor|
|Interface for managing target computer|
|Add target computer definition to targets object|
|Remove target computer definition from targets object|
|Get target computer environment settings|
|Get default target computer name|
|Set default target computer name|
|Get target computer connected status|
|Get real-time application loaded status|
|Get real-time application running status|
|Reset target object|
1. Target Computer Setup
Configure the Simulink Real-Time environment as required by the target computer. Speedgoat® target machines support PCI bus Ethernet cards.
2. Target Computer Boot Configuration
Run real-time applications by using the target computer in connected mode, standalone mode, or external mode. Speedgoat target machines boot the QNX® Neutrino® RTOS and then you run real-time applications in the selected target computer mode.
3. Installation Test
Examine models and scripts that illustrate Simulink Real-Time features.
Configuration and Control Alternatives
Configuring and controlling Simulink Real-Time interactively and by writing scripts and programs.
Troubleshoot problems that you encounter while using the Simulink Real-Time product